SparkFun Triad Spectroscopy Sensor – AS7265x Optical inspection breakout Combines visible UV IR LEDs with three spectral sensors Vcc 3.3V Qwiic I2C Serial Breadboardable or No Soldering Required

Utilizing our handy Qwiic system, no soldering is required to connect it to the rest of your system. Accuracy of +/-12%. This reduces the amount of required PCB space, and polarized connections mean you can't hook it up wrong. Optional external bulb or illumination control. We've written a fully formed arduino library to access all the various features include taking readings and illuminating LEDs all over the Qwiic I2C interface.

The triad is made up of three sensors; the as72651, the as72652, and the AS72653 and can detect the light from 410nm UV to 940nm IR. Measure and characterize how different materials absorb and reflect 18 different frequencies of light. However, we still have broken out 01"-spaced pins in case you prefer to use a breadboard.

The sparkfun triad spectroscopy Sensor communicates over I2C by default or over 115200bps serial. The serial interface uses an AT command set. What can you do with light spectroscopy? It's an amazing field of study, and the SparkFun Triad brings what used to be prohibitively expensive equipment to the desktop.

Integrated 405nm uv, 5700k White, and 875nm IR LEDs. All qwiic-enabled boards use a common 1mm pitch, 4-pin JST connector.

---

SparkFun Qwiic Cable Kit Hook Up I2C Qwiic development boards in no time No soldering required Includes 10 cables Different Lengths Styles Breadboardable Polarized 4-pin JST connector Daisy Chain-able

All qwiic-enabled boards use a common 1mm pitch, 4-pin JST connector. Each qwiic cable's wires have been color coded to red, black, blue and yellow with 1mm JST termination. The sparkfun qwiic connect system is an ecosystem of I2C sensors, actuators, shields and cables that make prototyping faster and less prone to error.

The sparkfun qwiic Connect System is constantly growing in popularity with makers. This reduces the amount of required PCB space, and polarized connections mean you can't hook it up wrong. Includes:3x qwiic cable - 50mm3x qwiic cable - 100mm1x qwiic cable - 200mm1x qwiic cable - 500mm1x Qwiic Cable - Breadboard Jumper 4-pin1x Qwiic Cable - Female Jumper 4-pinAll Qwiic cables have the following color scheme and arrangement:Black = GNDRed = 3.

3vblue = sdayellow = scl includes 10 cables of various lengths and styles that will get your Qwiic boards connected together. Each qwiic cable's wires have been color coded to red, black, blue and yellow with 1mm JST termination. Includes: 3x qwiic cable - 50mm, 1x qwiic cable - 200mm, 3x Qwiic Cable - 100mm, 1x Qwiic Cable - 500mm.

Also: 1x qwiic cable - breadboard Jumper 4-pin and 1x Qwiic Cable - Female Jumper 4-pin. Uses 4-pin jst connectors to quickly interface development boards with sensors, LCDs, relays and more. So to make it even easier to get started, we've assembled this Qwiic Cable Kit for everyone. If you aren't sure which qwiic cable to use, this handy box includes all of them allowing you to save a little money and time! It has a little something for everyone.




Similar products:

---

SparkFun RedBoard Qwiic ATMega328P Arduino Compatible Board with The Practical Qwiic Connector and CH340C Serial-USB Converter IC Breadboardable R3 footprint microcontroller Improved reset button

To help support the micro usb connector updated from a mini usb, the cH340C Serial-USB converter IC allows the RedBoard Qwiic should reduce the need for you to manually install drivers allowing for newer operating systems to automatically recognize and install the drivers for the board. The sparkfun qwiic connect system is an ecosystem of i2c sensors, actuators, shields and cables that make prototyping faster and less prone to error.

The best part about the redboard qwiic is that as the name implies it utilizes our handy qwiic connect system which means no soldering or shields are required to connect it to the rest of your system!Of course, we didn't just add a Qwiic Connector to the board, lets go over all the new additions that make the SparkFun RedBoard Qwiic unique! With the improved AP2112 voltage regulator, this Reboard gains a more robust 3.

3v regulator that provides it more power to daisy chain multiple Qwiic boards and sensors, sourcing up to 600mA of current. Rev3 shield compatible. Program with a usb micro-b cable using the Arduino IDE: Plug in the board, select "Arduino UNO" and you're ready to upload code. This reduces the amount of required PCB space, and polarized connections mean you can't hook it up wrong.

The jumpers for the a4 and a5 pins are tied directly to the I2C bus and can be used to disconnect the logic level converters from the pins while the voltage level jumpers can switch the RedBoard Qwiic from a 3. 3v device to a 5V device no logic level converter needed.


Similar products:

---

CH340G Development Tool with USB Micro-B connector Save space and money in your DIY electronics projects - SparkFun Serial Basic Breakout

Works with 5V and 3. 3v systems. This reduces the amount of required PCB space, and polarized connections mean you can't hook it up wrong. Ch340g usb ic from WCH. There is a jumper on the rear of the board that controls the output voltage on the VCC pin. Pinout: dtr, cts, tx, vcc, rx, GND. By default, the board outputs 3.

3v and has 3. 3v signals. Rev3 shield compatible. Program with a usb micro-b cable using the Arduino IDE: Plug in the board, select "Arduino UNO" and you're ready to upload code. Hardware peripherals you know and love: 20 digital I/O pins with 6 PWM pins, UART, 6 Analog Inputs, SPI and external interrupts. Broken out the sda, scl and ioref pins, so it will be compatible with future shields Power over USB or through the barrel jack 7 to 15VDC.

The sparkfun serial basic breakout is an easy-to-use USB-to-Serial adapter based on the CH340G IC from WCH. Changing this jumper to 5v will cause the board to output 5V on the VCC pin with 5V signals. The sparkfun qwiic connect system is an ecosystem of i2c sensors, actuators, shields and cables that make prototyping faster and less prone to error.

It works with 5V and 3. 3v systems and should auto install on most operating systems without the need for additional drivers. Includes 10 cables of various lengths and styles that will get your Qwiic boards connected together.


Similar products:

---

Raspberry Pi Zero W Wireless 2017 model

Pinout: dtr, vcc, rx, cts, tx, GND. By default, the board outputs 3. 3v and has 3. 3v signals. Wireless: 2. 4ghz 802. 11n wireless LAN WiFi. Bluetooth: bluetooth Classic 4. 1 and bluetooth LE. Dimensions: 65mm × 30mm × 5mm. Should auto install on most operating systems without the need for additional drivers. Changing this jumper to 5v will cause the board to output 5V on the VCC pin with 5V signals.

The sparkfun qwiic connect system is an ecosystem of i2c sensors, actuators, shields and cables that make prototyping faster and less prone to error. All qwiic-enabled boards use a common 1mm pitch, 4-pin JST connector. Specifications dimensions: 65mm × 30mm × 5mm soc: broadcom bcm2835 CPU: ARM11 running at 1GHz RAM: 512MB Wireless: 2.

4ghz 802. 11n wireless lan Bluetooth: Bluetooth Classic 4. 1 and bluetooth le power: 5v, unpopulated; rca composite, supplied via micro usb connector video & audio: 1080p hd video & stereo audio via mini-HDMI connector Storage: MicroSD card Output: Micro USB GPIO: 40-pin GPIO, unpopulated Pins: Run mode, unpopulated Camera Serial Interface CSI Includes 10 cables of various lengths and styles that will get your Qwiic boards connected together.

Each qwiic cable's wires have been color coded to red, black, blue and yellow with 1mm JST termination. Includes: 3x qwiic cable - 50mm, 3x qwiic cable - 100mm, 1x qwiic cable - 200mm, 1x Qwiic Cable - 500mm. Also: 1x qwiic cable - breadboard Jumper 4-pin and 1x Qwiic Cable - Female Jumper 4-pin.


Similar products:

---

ARDUINO MEGA 2560 REV3 A000067

Soc: broadcom bcm2835--cpu: arm11 running at 1GHz--RAM: 512MB. Arduino mega 2560 is designed for your most ambitious projects which require additional pins and extra memory. Bluetooth: bluetooth Classic 4. 1 and bluetooth LE. Based on the 8-bit avr microcontroller atmega2560, it has 54 digital I/O pins, 16 analog inputs and a larger space for your sketches.

Changing this jumper to 5v will cause the board to output 5V on the VCC pin with 5V signals. Wireless: 2. 4ghz 802. 11n wireless LAN WiFi. The sparkfun qwiic connect system is an ecosystem of i2c sensors, actuators, shields and cables that make prototyping faster and less prone to error. Dimensions: 65mm × 30mm × 5mm.

Pinout: dtr, rx, vcc, cts, tx, GND. By default, the board outputs 3. 3v and has 3. 3v signals. Microcontroller microchip atmega2560operating voltage 5vusb 1 - type bdigital I/O Pins 54PWM Pins 15Analog Input Pins 16DC Current per I/O Pin 20 mADC Current for 3. 3v pin 50 maflash memory 256 kbsram 8 kbeeprom 4 kbclock speed 16 mhz Includes 10 cables of various lengths and styles that will get your Qwiic boards connected together.




Similar products:

---

UCTRONICS 0.96 Inch OLED Module 12864 128x64 Yellow Blue SSD1306 Driver I2C Serial Self-Luminous Display Board for Arduino Raspberry PI

Should auto install on most operating systems without the need for additional drivers. So this module can be controlled by I2C. Changing this jumper to 5v will cause the board to output 5V on the VCC pin with 5V signals. Arduino is an open-source hardware, software, and content platform with a worldwide community of over 30 million active users.

Uctronics 096 inch oled module for showing graphical & textual information directly on your micro-controller projects. Communication: i2c/iic Interface, only need two I / O ports. That is, except the vcc and gnd, 2 wires would be needed when using 4-wires I2C mode. Soc: broadcom bcm2835--cpu: arm11 running at 1GHz--RAM: 512MB.

It has super high contrast, bright and crisp dots, even tiny fonts quite readable. No embedded fonts inside the oled controller, user can create the fonts through the font generation software. Hardware peripherals you know and love: 20 digital I/O pins with 6 PWM pins, 6 Analog Inputs, UART, SPI and external interrupts.

Broken out the sda, scl and ioref pins, so it will be compatible with future shields Power over USB or through the barrel jack 7 to 15VDC. The sparkfun qwiic connect system is an ecosystem of i2c sensors, actuators, shields and cables that make prototyping faster and less prone to error. It supports many chips: arduino UNO and Mega, Raspberry pi, STIM 32, etc.




Similar products:

---

ELEGOO MEGA 2560 R3 Board ATmega2560 ATMEGA16U2 + USB Cable Compatible with Arduino IDE, RoHS Compliant

It has super high contrast, bright and crisp dots, even tiny fonts quite readable. No embedded fonts inside the oled controller, user can create the fonts through the font generation software. Hardware peripherals you know and love: 20 digital I/O pins with 6 PWM pins, UART, 6 Analog Inputs, SPI and external interrupts.

Broken out the sda, scl and ioref pins, so it will be compatible with future shields Power over USB or through the barrel jack 7 to 15VDC. Changing this jumper to 5v will cause the board to output 5V on the VCC pin with 5V signals. Soc: broadcom bcm2835--cpu: arm11 running at 1GHz--RAM: 512MB. The mega is 100% compatible with arduino IDE and most shields designed for the Arduino mega2560 r3，RoHS Compliant.

The second one is a not connected pin, the IOREF that allow the shields to adapt to the voltage provided from the board. Needn't backlight, the display unit can self-luminous. The sparkfun qwiic connect system is an ecosystem of i2c sensors, actuators, shields and cables that make prototyping faster and less prone to error.

Wireless: 2. 4ghz 802. 11n wireless LAN WiFi. 5mm dc barrel jack.


Similar products:

---

EDGELEC 120pcs Breadboard Jumper Wires 10cm 15cm 20cm 30cm 40cm 50cm 100cm Optional Arduino Wire Dupont Cable Assorted Kit Male to Female Male to Male Female to Female Multicolored Ribbon Cables

Soc: broadcom bcm2835--cpu: arm11 running at 1GHz--RAM: 512MB. The sparkfun qwiic connect system is an ecosystem of i2c sensors, actuators, shields and cables that make prototyping faster and less prone to error. Cable features: Separable multicolored 10 colors softness ribbon cables. Dimensions: 65mm × 30mm × 5mm.

. Works with 5V and 3. 3v systems. It supports many chips: arduino UNO and Mega, STIM 32, Raspberry pi, etc.51 mcu, the uno shown in the picture is NOT INCLUDE. Resolution: 128 x 64, view angle: > 160°, support voltage: 3. 3v-5v dc, power consumption: 004w during normal operation, full screen lit 008w. Embedded driver ic: ssd1306.

Hardware peripherals you know and love: 20 digital I/O pins with 6 PWM pins, UART, 6 Analog Inputs, SPI and external interrupts. Broken out the sda, scl and ioref pins, so it will be compatible with future shields Power over USB or through the barrel jack 7 to 15VDC. Based on the 8-bit avr microcontroller atmega2560, it has 54 digital I/O pins, 16 analog inputs and a larger space for your sketches.

Pinout: dtr, vcc, tx, cts, rx, GND.


Similar products:

---

HiLetgo ADS1115 16 Bit 16 Byte 4 Channel I2C IIC Analog-to-Digital ADC PGA Converter with Programmable Gain Amplifier High Precision ADC Converter Development Board for Arduino Raspberry Pi

Cable features: Separable multicolored 10 colors softness ribbon cables. 1mm dc barrel jack compatible with 5. Use 5. All qwiic-enabled boards use a common 1mm pitch, 4-pin JST connector. 5 * 2. It has super high contrast, bright and crisp dots, even tiny fonts quite readable. No embedded fonts inside the oled controller, user can create the fonts through the font generation software.

Raspberry Pi Zero W. Arduino mega 2560 is designed for your most ambitious projects which require additional pins and extra memory. Soc: broadcom bcm2835--cpu: arm11 running at 1GHz--RAM: 512MB. 0 pinout: added sda and scl pins that are near to the aref pin and two other new pins placed near to the RESET pin, which operate with 5V and with the Due that operate with 3.

The chip is atmega2560-16au and Atmega16u2, same with the official version. Improved and expert version: 1. Should auto install on most operating systems without the need for additional drivers. Wide voltage supply range: 2. 0v to 5. 5v, operate in a comparator mode which is helpful for maintaining accuracy. Communication: i2c/iic Interface, only need two I / O ports.




Similar products:

---

ELEGOO 3pcs MB-102 Breadboard 830 Point Solderless Prototype PCB Board Kit for Arduino Proto Shield Distribution Connecting Blocks

Colored power rails for wires 21 to 26 awg 2-sided peelable adhesive tape Component listing: 3pcs 830 tie-points breadboard Includes 10 cables of various lengths and styles that will get your Qwiic boards connected together. Each qwiic cable's wires have been color coded to red, black, blue and yellow with 1mm JST termination.

Includes: 3x qwiic cable - 50mm, 1x qwiic cable - 200mm, 3x Qwiic Cable - 100mm, 1x Qwiic Cable - 500mm. Also: 1x qwiic cable - breadboard Jumper 4-pin and 1x Qwiic Cable - Female Jumper 4-pin. Uses 4-pin jst connectors to quickly interface development boards with sensors, LCDs, relays and more. Atmega328 microcontroller with Optiboot UNO Bootloader.

5 * 2. We have always cared about the customer experience and improve the product function details. All qwiic-enabled boards use a common 1mm pitch, 4-pin JST connector. Arduino is an open-source hardware, software, and content platform with a worldwide community of over 30 million active users. Uctronics 096 inch oled module for showing graphical & textual information directly on your micro-controller projects.

It supports many chips: arduino UNO and Mega, STIM 32, Raspberry pi, etc.51 mcu, the uno shown in the picture is NOT INCLUDE.


Similar products: