Miuzei Raspberry Pi 3B+ Case with Fan, HDMI Cable, 16GB SD Card, 2.5 A Power Supply and 3 Pcs Heat-Sinks Compatible with Raspberry Pi 3 B+, 3 B, 2 B

2 kindly to know this case can't fit for ASUS tinker board. This is 2018 new designed 9 layers case for raspberry pi 3 model B+, also could compatible with raspberry pi 3 / pi 3 model b/ pi 2 / pi 2 model b. Accurate plugs on the case are available to connect Pi's GPIO, USB, SD, HDMI, Power Supply etc ports.

The case also can compatible with raspberry pi 3 model b+ / 3 model b / 2 model b /. Made of acrylic, the pi case makes sure that won't block Pi's Wifi / Bluetooth signal. Miuzei raspberry pi 3 b+ case with fan, 16 gb sd card, 3 pcs heatsinks, 1m hdmi cable, 1.5m usb cable with 5V 2. 5a power supplyNot include Pi Board.

Case has the designed layout for the Raspberry pi 3 model b+ and will perfectly protect your pi components. Package included: 1x acrylic case for raspberry pi 3 model b+ / 3 / 2 1x 16 GB SD card1x HDMI cable1x Mute Cooling Fan 1x 5V 2. 5a power supply with micro usb cable 3x aluminum heat sinks 4x metal screws 4x metal nuts any question there, please don't hesitate to contact us to get services via Buyer Message or Q&A Note: Please tear off the protective films on the top&bottom layers before use 1 Small components inside, please away from young kids below 3yrs.

.

---

Element14 Raspberry Pi 3 B+ Motherboard

Bluetooth 4. 2, bluetooth Low Energy. To take full advantage of the improved power management on the Raspberry Pi 3 and provide support for even more powerful devices on the USB ports, a 2. 4ghz- 1gb ram - bcm43143 wi-fi on board- bluetooth low energy ble on board- 40 pin extended gpio - 4 x usb2 ports- 4 pole stereo output and composite video port- Full size HDMI- CSI camera port for connecting the Raspberry Pi camera - DSI display port for connecting the Raspberry Pi touch screen display - Micro SD port for loading your operating system and storing data- Upgraded switched Micro USB power source now supports up to 2.

802. 11n wireless lan, 10/100Mbps Lan Speed. 4ghz quad-core 64 bit processor with low energy on-board wi-fi bluetooth and USB Port Built on the latest Broadcom 2837 ARMv8 64 bit processor, Raspberry Pi 3 Model B+ is faster and more powerful than its predecessors. 4 usb ports, full hdmi port, 40 gpio pins, Combined 3.

5mm audio jack and composite video. Camera interface csi, micro sd card slot now push-pull rather than push-push, display interface dsI, VideoCore IV 3D graphics core. New original raspberry Pi 3 Model B+ Built-in Broadcom 1. Technical specifications: - broadcom bcm2837bo 64 bit ARMv8 QUAD Core A53 64bit Processor powered Single Board Computer run at 1.

.


Similar products:

---

RS Components Raspberry Pi 3 B+ Motherboard

The rs components raspberry pi 3 model b+ is the latest product in the Raspberry Pi 3 range, featuring a 64-bit quad core processor running at 1. 4ghz, dual-band 2. 4ghz and 5ghz wireless LAN, Bluetooth 4. 2/ble, faster ethernet, and PoE capability via a separate PoE HAT. This product is made by RS Components and comes in RS Components packaging.

Required for Operation Not Included 2. 5a microusb power supply recommended class 10 microsd card pre-loaded with Pi 3 B+ compatible software USB or Bluetooth keyboard/mouse Optional HDMI or DSI Display Optional 1. 4ghz 64-bit quad-core armv8 CPU, 1 GB RAM. 4 usb ports, 40 gpio pins, full hdmi port, Combined 3.

5mm audio jack and composite video. Camera interface csi, display interface dsI, Micro SD card slot now push-pull rather than push-push, VideoCore IV 3D graphics core.1. 4ghz 64-bit quad-core armv8 cpu bcm2837B0, 1 GB RAM. Poe hat support, camera interface cSI, Display interface DSI, 40 GPIO Pins. Made by rs components and comes in RS Components packaging.

802.


Similar products:

---

Miuzei Raspberry Pi 3 b+ Screen, 3.5 Inch Touch Screen Resolution 480 320 to 1920 1080 for Raspberry Pi 3 Model B+, 3B, 2B with Touch Pen MP-3.5

Please backup your system if you want to use the touch function at your current system, you need add the Driver debugging system by yourself need more time to do that. Bluetooth 4. 2, bluetooth Low Energy. 802. 11n wireless lan, 10/100Mbps Lan Speed. Hdmi interface: support any hdmi hd interface, DVD, data entry computer, HDMI audio input, stereo 3.

5mm audio output. Display function support system: raspbian, ubuntu, Retrope, windows10 Just need install OS Touchfunction Support System：Kali, kali, Raspbian, ubuntupi 3b. Come with detailed tutorials in a cd including project introductions and source code for free, screen driver installing on existing systems is not supported.

Providing a convenient man-machine interface for raspberry pi, you could take it anywhere with the use of power bank. Poe hat support, camera interface cSI, Display interface DSI, 40 GPIO Pins. Made by rs components and comes in RS Components packaging. The miuzei 3. 5 inch touch screen input resolution could up to 1920*1080

4 usb ports, full hdmi port, 40 gpio pins, Combined 3.5mm audio jack and composite video. Camera interface csi, display interface dsI, Micro SD card slot now push-pull rather than push-push, VideoCore IV 3D graphics core.


Similar products:

---

Raspberry Pi 3 Model B+ Mini Computer with High Performance Heatsink Set

Element 14 is a registered trademark of Premier Farnell. Bluetooth 4. 2, bluetooth Low Energy. Bluetooth 4. 2, bluetooth Low Energy. This is a welcomed addition that is bound to save many users the hassle of getting wireless setup. Whats included: - raspberry pi 3 model b+ mini computer - loverpi 10 mm cpu heatsink with 3m double-sided thermal adhesive - LoveRPi 5 mm LAN Heatsink with 3M Double-Sided Thermal Adhesive - Element14 Quick Start Guide - Element14 Retail Box - LoveRPi Troubleshoot Sheet The Raspberry Pi 3 Model B+ will consume around 1.

5a of current by itself. The new board also has built-in support for wireless technologies like Dual-Band 2. 4ghz 802. 11n and 5ghz 802. 11ac wifi and Bluetooth 4. 2 low Energy. 1. 4ghz 64-bit quad-core armv8 CPU, 1 GB RAM. Proper power and software: if the red led on the board blinks or turns off at any time, your power supply is not providing adequate voltage.

Raspberry pi is a registered trademark of the Raspberry Pi Foundation. Hdmi interface: support any hdmi hd interface, HDMI audio input, DVD, data entry computer, stereo 3.


Similar products:

---

CanaKit Raspberry Pi 3 B+ B Plus with 2.5A Power Supply UL Listed

Dual band 2. 4ghz and 5ghz ieee 802. 11. B/g/n/ac wireless LAN. Please backup your system if you want to use the touch function at your current system, you need add the Driver debugging system by yourself need more time to do that. Required additional components not included: Certified 2. 5a power supply and properly Flashed MicroSD Card required for operation!

Bluetooth 4. 2, bluetooth Low Energy. 802. 11n wireless lan, 10/100Mbps Lan Speed. Proper power and software: if the red led on the board blinks or turns off at any time, your power supply is not providing adequate voltage. So we suggest that you use our system which has the screen driver installed and then the screen can be working well without the complicated operation.

Raspberry pi 3 model b+: mini computer with 1. 4ghz quad core arm cortex-a53, mipi dsi connector for displays, microsdhc slot, broadcom videocore iv gpu, usb 2.0 gigabit ethernet port, 3. 5mm av port composite video out + stereo out, 1gb lpddr2 RAM, 40 Pin GPIO Header, HDMI 1.3 port, mipi csi connector for cameras, 4 full Size USB Ports Shared Bandwidth, MicroUSB Power Connector.

Amazing performance: blazing fast quad-Core 64-bit CPU and Faster GPU opens a new realm of possibilities and applications limited only by your creativity.


Similar products:

---

Freenove Ultimate Starter Kit for Raspberry Pi 3 B+, 434 Pages Detailed Tutorials, Python C Java, 223 Items, 57 Projects, RPi 3B+ 3B 3A+ 2B 1B+ 1A+ Zero W

Chapter 18 infrared Motion Sensor  Project 18. 1 sense led app 1 oscilloscope  App 1. 1 oscilloscope   . Download tutorial for details   . Supported models: recommended:  raspberry pi 3b+ / 3b compatible:  raspberry pi 3A+ / 2B / 1A+ / Zero W / 1B+ / Zero Tutorials and codes: This kit contains 2 detailed tutorialsPDF, oneTutorial.

Pdf using C and Python, anotherProcessing. Pdf using Java. Download tutorial for details   . Dual band 2. 4ghz and 5ghz ieee 802. 11. B/g/n/ac wireless LAN, Enhanced Ethernet Performance. Not included in this kit. Get support -> our technical service team is always ready to answer your questions. Set of 2 aluminum Heat Sinks.

Proper power and software: if the red led on the board blinks or turns off at any time, your power supply is not providing adequate voltage. Dual band 2. 4ghz and 5ghz ieee 802.


Similar products:

---

Raspberry Pi 7" Touch Screen Display

Without properly flashed MicroSD card, the board will not display anything on HDMI. Bluetooth 4. 2, bluetooth Low Energy. Poe hat support, camera interface cSI, Display interface DSI, 40 GPIO Pins. Made by rs components and comes in RS Components packaging. Proper power and software: if the red led on the board blinks or turns off at any time, your power supply is not providing adequate voltage.

Required additional components not included: Certified 2. 5a power supply and properly Flashed MicroSD Card required for operation! Dual band 2. 4ghz and 5ghz ieee 802. 11. B/g/n/ac wireless LAN. So we suggest that you use our system which has the screen driver installed and then the screen can be working well without the complicated operation.

Raspberry pi 3 model b+: mini computer with 1. 4ghz quad core arm cortex-a53, broadcom videocore iv gpu, microsdhc slot, mipi dsi connector for displays, usb 2.0 gigabit ethernet port, 3. 5mm av port composite video out + stereo out, 40 pin gpIO Header, 1GB LPDDR2 RAM, HDMI 1.3 port, mipi csi connector for cameras, 4 full Size USB Ports Shared Bandwidth, MicroUSB Power Connector.




Similar products:

---

Raspberry Pi 32GB Preloaded NOOBS SD Card

Raspberry pi foundation official 32GB MicroSD Card with Full-Size Adapter. Fully qualified by the Raspberry Pi Foundation for Optimum Performance. The processor is 64-bit and can run Raspbian which is a 32-bit operating system. Includes raspberry pi 3 b+ b plus with 1. 4 ghz 64-bit quad-core processor, 1 GB RAM.

Dual band 2. 4ghz and 5ghz ieee 802. 11. B/g/n/ac wireless LAN, Enhanced Ethernet Performance. 802. 11n wireless lan, 10/100Mbps Lan Speed. Official 32gb microSD Card and Full-Size Adapter. Preloaded with the NOOBS Operating System. Preloaded with the NOOBS Operating System. Sandisk ultra class 10 MicroSD Card in OEM black color packaging.

Bluetooth 4. 2, bluetooth Low Energy. Not included in this kit. Get support -> our technical service team is always ready to answer your questions. This 7" touchscreen display for the Raspberry Pi is perfect for creating portable and embedded projects where a keyboard and mouse would be in the way.


Similar products:

---

Vilros Retro Gaming 5 USB Classic Controller Set- Nintendo NES, Super Nintendo SNES, Sega Genesis, Nintendo 64 N64, Playstation 2 PS2 Great for RetroPie,PC, Raspberry Pi Gamepad

So we suggest that you use our system which has the screen driver installed and then the screen can be working well without the complicated operation. Raspberry pi 3 model b+: mini computer with 1. 4ghz quad core arm cortex-a53, microsdhc slot, mipi dsi connector for displays, broadcom videocore iv gpu, usb 2.

0 gigabit ethernet port, 3. 5mm av port composite video out + stereo out, 40 pin gpIO Header, 1GB LPDDR2 RAM, HDMI 1.3 port, mipi csi connector for cameras, 4 full Size USB Ports Shared Bandwidth, MicroUSB Power Connector. Amazing performance: blazing fast quad-Core 64-bit CPU and Faster GPU opens a new realm of possibilities and applications limited only by your creativity.

Required additional components not included: Certified 2. 5a power supply and properly Flashed MicroSD Card required for operation!3 programing languages -> C, Python compatible with 2&3 and Java virtual interface. 434 pages detailed pdf tutorials include basic electronics knowledge and complete code -> Download link: https://github.

Com/freenove/freenove_Ultimate_Starter_Kit_for_Raspberry_Pi/archive/master. Zip. Includes: 1 snes style controller--1 nes style controller--1 PS2 Controller--1 N64 Controller--1 SEGA Genesis Syle Controller. Poe hat support, camera interface cSI, Display interface DSI, 40 GPIO Pins.


Similar products:

---

Raspberry Pi Camera Module V2-8 Megapixel,1080p

Dual band 2. 4ghz and 5ghz ieee 802. 11. B/g/n/ac wireless LAN. Poe hat support, camera interface cSI, Display interface DSI, 40 GPIO Pins. Made by rs components and comes in RS Components packaging. 1. 4ghz 64-bit quad-core armv8 CPU, 1 GB RAM. The raspberry pi camera v2 features the same, tiny footprint 25mm x 23mm x 9mm as the original Pi Camera module, but features an upgraded Sony IMX219 image sensor which has a native resolution of 8 megapixels.

Bluetooth 4. 2, bluetooth Low Energy. The processor is 64-bit and can run Raspbian which is a 32-bit operating system. Includes raspberry pi 3 b+ b plus with 1. 4 ghz 64-bit quad-core processor, 1 GB RAM. Dual band 2. 4ghz and 5ghz ieee 802. 11. B/g/n/ac wireless LAN, Enhanced Ethernet Performance. Fully qualified by the Raspberry Pi Foundation for Optimum Performance.

So we suggest that you use our system which has the screen driver installed and then the screen can be working well without the complicated operation. Raspberry pi 3 model b+: mini computer with 1.


Similar products: