LINEAR GoControl, WS15Z-1, Zwave Wall Mount Switch,White,Small

Uses z-wave's Scene Command Class. Compatible with any Z-Wave certified gateway. 960w 8a max incandescent load, 1, 800w 15a Max Resistive Load, For Dual-switch 3-way Applications. Fits in Standard J-box. Its decora wall plate complements most styles. White. The linear z-wave 15-amp wall switch is a 3-way device that allows both Z-Wave and manual control for connected lights.

This product functions at a maximum incandescent load of 960 watts and maximum resistive load of 1, 800 watts for dual-switch, 3-way applications. Wireless z-wave 3-way Wall Switch. Z-wave smart chips enable two-way RF communication among hundreds of Z-Wave-enabled devices using the Z-Wave international wireless standard.

Signal frequency: 608. 42 mhz. Z-wave & manual Control For Connected Lights. Wireless z-wave wall Switch allows remote ON/OFF. Easily replace existing standard switch to add a Z-Wave controlled light switch. Includes Decor Wall Plate.

---

Linear WD500Z-1 Z-Wave 500-Watt Wall-Mount Dimmer Switch

Make sure the lamps to be controlled directly from the dimmer receiver total no more than 500 watts. The switch is compatible with permanently-installed incandescent, halogen and LED lighting, fluorescent, compact fluorescent, with a capacity of up to 500 watts. The dimmer switch sports a small blue led indicator lamp that shines when the switch is on, however it can be easily programmed to illuminate when the switch is off if desired, to help locate the switch in the dark.

Linear is the world's largest consumer of Z-Wave chips for smart devices and we've been successfully building wireless electronics for over 53 years - so you know that we take quality seriously. Liner's wd500z dimmer switch can be included in a programmed lighting 'scene', such that multiple Z-Wave-connected lights or electrical items can be turned on or off with a single click of your controller or remote device.

Z-wave controllers - I. The wd500z-1 dimmer switch can only be installed in homes that have neutral wiring ·    Nortek Security & Control strongly recommends that the installation of the WD500Z-1 dimmer switch be performed by an experienced electrician. Incorrect or improper wiring of the WD500Z-1 dimmer switch can cause irreparable damage to the switches circuitry.

55 network inclusion scene command Class Security Compatible Requires a Neutral Replaceable Trim Ring Design. The product will have wires which are pre-cut for easy stripping. All linear z-wave products are compatible with certified Z-Wave controllers, allowing integration with a large number of options in home automation systems.




Similar products:

---

GoControl WO15Z-1 Z-Wave Single Wall Outlet, White

Linear z-wave products provide up to 100 feet range between the wireless controller and/or the closest Z-Wave device. Outlets include a white decorative switch plate and are tamper-resistant in compliance with NEC 2008. Caution:- to reduce the risk of overheating and possible damage to other equipment, a motor operated appliance, or a transformer-supplied appliance, do not install to control a receptacle, a fl uorescent lighting fi xture, but only permanently installed incandescent lamp fixtures.

E. One of the outlet ports is a Z-Wave controlled outlet the second outlet remains powered at all times. Embedded in each z-wave device that linear makes, the Z-Wave smart chip enables two-way RF communication among hundreds of Z-Wave enabled devices, allowing products and services from multiple manufacturers to work seamlessly.

Linear is helping to make your home high tech yet also making it so simple to install and use! The Linear WO15Z-1 Duplex Wall Outlet is wired in place of your standard electrical outlet and allows wireless Z-Wave remote ON/OFF control of connected items using a remote, wall controller, or smart phone or tablet.

Linear has provided best-in-class home & business control solutions for over 50 years and is a leading worldwide manufacturer of Z-Wave products. Easily replace existing standard wall outlets to add a Z-Wave controlled outlet. Z-wave controllers - I. Up to 100 feet line of sight between the Controller and /or the closest Z-Wave Receiver Module.

The outlet sports a blue led status indicator, giving you the comfort of knowing it's working and helping you to locate the outlet in a dark room.


Similar products:

---

Add-On Z-Wave Switch by Enerwave | 3-Way Z-Wave Light Switch for Home Automation System Light/Fan Control, use with Z-Wave Dimmer and Z-Wave Wall Switch, ZW3K-N, Interchangeble Face Cover

Up to 100 feet line of sight between the Controller and /or the closest Z-Wave Receiver Module. White. Performs the same functions of Z-Wave switch it is paired with. Control one light or fan from two or more locations, such as the opposite ends of a staircase, hallway, or multi-entrance room. Three interchangeable face covers white-attached, light almond, black are included for easy color changes.

Two extra interchangeable covers - black, 1800w, 1/2hp. Enables 3-way and multi-location control to a z-wave light switch such as ZW15SM-PLUS, Z-Wave dimmer switch such as ZW500DM-PLUS, or Z-Wave fan control. Ul-listed, 120vaC, Traveler**. Linear has provided best-in-class home & business control solutions for over 50 years and is a leading worldwide manufacturer of Z-Wave products.

Outlets include a white decorative switch plate and are tamper-resistant in compliance with NEC 2008. Works as an add-on switch for z-wave home automation light switches and dimmers, NOT a standalone switch. Reduces energy consumption and provides more convenience to you and your family. Z-wave smart chips enable two-way RF communication among hundreds of Z-Wave-enabled devices using the Z-Wave international wireless standard.

500 watts for control of permanently installed incandescent lamp fixtures only not for control of receptacles. This wireless auxiliary smart switch is not Z-Wave enabled but it enables three way control to Z-Wave devices from multiple locations when connected with Enerwave Z-Wave switches and dimmers.




Similar products:

---

Z-Wave Minimote - Aeon Labs DSA03202 v1

Performs the same functions of Z-Wave switch it is paired with. Linear z-wave products provide up to 100 feet range between the wireless controller and/or the closest Z-Wave device. White. Z-wave smart chips enable two-way RF communication among hundreds of Z-Wave-enabled devices using the Z-Wave international wireless standard.

500 watts for control of permanently installed incandescent lamp fixtures only not for control of receptacles. Linear has provided best-in-class home & business control solutions for over 50 years and is a leading worldwide manufacturer of Z-Wave products. Requires z-Wave home automation switches to work.

Enables 3-way and multi-location control to a z-wave light switch such as ZW15SM-PLUS, Z-Wave dimmer switch such as ZW500DM-PLUS, or Z-Wave fan control. Works as an add-on switch for z-wave home automation light switches and dimmers, NOT a standalone switch. 2you'll notice that a red LED will appear next to the miniUSB port of the Minimote.

You may now remove the Minimote from USB connection. The installed on-board firmware is the latest edition version, bringing you identical capabilities as the Minimote DSA03202W-ZWUS. Reduces energy consumption and provides more convenience to you and your family. Same functionality as newer G1v2 models.


Similar products:

---

GE Z-Wave Wireless Smart Lighting Control Smart Switch, On/Off, In-Wall, Includes White & Light Almond Paddles, Works with Amazon Alexa, 12722

Z-wave smart chips enable two-way RF communication among hundreds of Z-Wave-enabled devices using the Z-Wave international wireless standard. 500 watts for control of permanently installed incandescent lamp fixtures only not for control of receptacles. Easily replace any standard in-wall switch with the GE Z-Wave Smart Switch to control permanently installed lighting or fans with your mobile device or computer using any Z-Wave certified gateway.

Can be controlled in groups of multiple lights or turned on or off within ambient interior Lighting scenes. Screw terminal installation provides improved space efficiency when replacing existing switches compared to flying leads neutral connection required for installation. Compatable with the following z-wave certified hubs: SmartThings, Trane, Pulse, Honeywell, Wink, HomeSeer, Smart Security, Vera, Harmony, Nexia, Connect and Iris.

Pair with on/off light switches, dimmer switches, or fan controls. Make sure the lamps to be controlled directly from the dimmer receiver total no more than 500 watts. Uses z-wave's Scene Command Class. Works with alexa for voice control hub Required, Alexa device and hub sold separately. Easily replace existing standard wall outlets to add a Z-Wave controlled outlet.

Extended battery life.


Similar products:

---

Samsung SmartThings Hub, 2nd Generation

Since smartthings is compatible with a wide variety of smart devices from different companies, ZigBee, Android, you can add as many additional SmartThings sensors or other popular Z-Wave, once you have the SmartThings Hub and the free app for iOS, or Windows, or Internet-connected products as you want to enhance your connected home.

Note: please reference user guide and Specification Sheet below under 'Technical Specifications' for instructions on how to add devices and troubleshoot connectivity issues White. Press and hold the blank center button until the display changes 3. Works as an add-on switch for z-wave home automation light switches and dimmers, NOT a standalone switch.

Tap the menu 2. Teach your house new tricks by telling it what to do when you're asleep, away, awake, and back home. Requires an internet-connected router with an available Ethernet port Requires the free SmartThings app for iOS 8. 1 or later, Android 4. 0 or later, or Windows Phone 8. 1 or later. Extended battery life.

Tap general Device Exclusion 5. Linear z-wave products provide up to 100 feet range between the wireless controller and/or the closest Z-Wave device.


Similar products:

---

GoControl/Linear GD00Z-4 Z-Wave Garage Door Opener Remote Controller, Small, Black

Z-wave smart chips enable two-way RF communication among hundreds of Z-Wave-enabled devices using the Z-Wave international wireless standard. 500 watts for control of permanently installed incandescent lamp fixtures only not for control of receptacles. Linear has been providing best-in-class home & business control solutions for over 50-years and is a leading worldwide mfg.

Ul-listed, 120vaC, Traveler**. Upgradable firmware. It is just that easy to have a complete system that will open or close the garage door remotely through a Z-Wave certified Gateway or Security Panel. Works as an add-on switch for z-wave home automation light switches and dimmers, NOT a standalone switch. Caution:- to reduce the risk of overheating and possible damage to other equipment, or a transformer-supplied appliance, a fl uorescent lighting fi xture, a motor operated appliance, do not install to control a receptacle, but only permanently installed incandescent lamp fixtures.

Extended battery life. Providing both audible and visual warnings prior to door movement, the GD00Z meets UL 325-2010 safety requirements. Choose from a wide range of compatible devices, sensors, speakers, locks, including lights, thermostats, and more. Use the smartthings app or amazon alexa to control your smart home.

Usb charging & sync cable included.


Similar products:

---

Linear PS15Z-2 Z-Wave Plug-In Remote On/Off Appliance Module, Small, White

Liner's ps15z plug-in switch can be included in a programmed lighting 'scene', such that multiple Z-Wave-connected lights or electrical items can be turned on or off with a single click of your controller or remote device. Up to 100 feet line of sight between the Controller and /or the closest Z-Wave Receiver Module.

15a. The ps15z allows wireless z-wave remote ON/OFF control of the plugged in items using a remote, wall controller, or smart phone or tablet. Also, the ps15z features an 'always-on' pass-through plug receptacle that is not controlled by Z-Wave, so that you can still have two items plugged into the outlet - one controlled by Z-Wave and one not controlled.

Requires z-Wave home automation switches to work. Easy to install and use. Integrates with other z-wave devices & acts as wireless repeater. Pair with on/off light switches, dimmer switches, or fan controls. Teach your house new tricks by telling it what to do when you're asleep, awake, away, and back home. Requires an internet-connected router with an available Ethernet port Requires the free SmartThings app for iOS 8.

1 or later, Android 4. 0 or later, or Windows Phone 8. 1 or later.


Similar products:

---

GoControl Z-Wave Plug-in Dimmer Module - PD300Z-2

Same functionality as newer G1v2 models. Z-wave smart chips enable two-way RF communication among hundreds of Z-Wave-enabled devices using the Z-Wave international wireless standard. 500 watts for control of permanently installed incandescent lamp fixtures only not for control of receptacles. Easy to use with no wiring required.

Works as an add-on switch for z-wave home automation light switches and dimmers, NOT a standalone switch. Choose from a wide range of compatible devices, including lights, speakers, sensors, locks, thermostats, and more. Use the smartthings app or amazon alexa to control your smart home. The pd300z, gives wireless z-wave on/off/Dimming control of the device using a remote, wall controller, smart phone or tablet.

Performs the same functions of Z-Wave switch it is paired with. Just plug it in and it works with any certified Z-Wave gateway. Reduces energy consumption and provides more convenience to you and your family. Up to 100 feet line of sight between the Controller and /or the closest Z-Wave Receiver Module. Plugs into any standard grounding AC wall outlet & appliances Plug into device.

Please reference user guide and Specification Sheet below under 'Technical Specifications' for instructions on how to add devices and troubleshoot connectivity issues. Ul-listed, 120vaC, Traveler**.


Similar products:

---

GoControl Z-Wave Isolated Contact Fixture Module - FS20Z-1

Easily replace existing standard wall outlets to add a Z-Wave controlled outlet. Nortek security & control/go control has been providing best-in-class home & business control solutions for over 50-years and is a leading worldwide mfg. Linear z-wave products provide up to 100 feet range between the wireless controller and/or the closest Z-Wave device.

Just plug it in and it works with any certified z-wave gateway. Go control z-wave lighting devices can be voice-controlled using the Amazon Echo and Wink smart hub. G. Liner's fs20z is wired in place of the switch or inside the junction box where the device gets its power even if it doesn't have a traditional switch, such as with a pump, outdoor display electronics or an electric hot water heater.

Specifications - power: 120vac, garage door position sensor frequency: 345 MHz, 50/60 Hz, Z-Wave Frequency: 908.42 mhz. Wireless z-wave. 42 mhz range: up to 100 feet between the wireless controller and/or the closest Z-Wave device Input: 120 VAC, 50/60 Hz Z-Wave Version 4. Requires a Neutral wire. Includes one controlled and one 'pass-thru' outlet.

It connects wirelessly with a wide range of smart devices and makes them work together.


Similar products: