Raspberry PI 5MP Camera Board Module

PI KIDS Publications Intl 100003 - It attaches to pi by way of one of the small sockets on the board upper surface and uses the dedicated CSi interface, designed especially for interfacing to cameras. It connects to Raspberry Pi by way of a short ribbon cable. It's capable of 2592 x 1944 pixel static images, and also supports 1080p30, 720p60 and 640x480p60/90 video.

The raspberry pi camera module is a 5 megapixel custom designed add-on for Raspberry Pi, featuring a fixed focus lens. The camera is supported in the latest version of Raspbian, Raspberry Pi's preferred operating system. In terms of still images, the camera is capable of 2592 x 1944 pixel static images, and also supports 1080p30, 720p60 and 640x480p60/90 video.

Raspberry PI 5MP Camera Board Module - Supports 1080p30, 720p60 and 640x480p60/90 video. 1. 4 µm x 1. 4 µm pixel with omnibsi technology for high performance high sensitivity, low crosstalk, windowing, cropping, low noise optical size of 1/4" automatic image control functions: - automatic exposure control AEC - automatic white balance AWB - automatic band filter ABF - automatic 50/60 Hz luminace detection - automatic black level calibration ABLC programmable controls for frame rate, mirror and flip, AEC/AGC 16-zone size/position/weight control, and panning digital video port DVP parallel output interface 32 bytes of embedded one-time programmable OTP memory 5 megapixel native resolution sensor-capable of 2592 x 1944 pixel static images.

It also weighs just over 3g, making it perfect for mobile or other applications where size and weight are important. The sensor itself has a native resolution of 5 megapixel, and has a fixed focus lens on-board.

More information about PI KIDS Publications Intl 100003

GoPiGo3 Robot Base Kit for STEM Learning with the Raspberry Pi

Dexter Industries 2 - Gopigo raspberry pi Robot that turns your Raspberry Pi into a Robot. Raspberry Pi Robotics Base Kit. Works with the raspberry pi Model A, and B+, B, 2 and 3. Powered by 8 aA batteries. With so many programming languages and usb accessories available for the Pi, you can turn your GoPiGo into anything from a WiFi controlled robot for exploring the scary spaces behind the couch to an autonomous rocket launching office enforcer.

The gopigo is a complete robot package for the Raspberry Pi. No soldering required. Software examples and API are provided by Dexter Industries. Raspberry pi, aa batteries, raspberry pi Camera, and Servo Package are all sold separately. With the raspberry Pi acting as the brains of the robot, the possibilities are infinite.

GoPiGo3 Robot Base Kit for STEM Learning with the Raspberry Pi - . It comes with everything you need to get your Raspberry Pi rolling, motors, controls, including a robot body, and a robust power supply.

More information about Dexter Industries 2


Similar products:


Raspberry Pi 3 Model B Motherboard

RASPBERRY PI RASPBERRYPI3-MODB-1GB - It has improved power management to support more powerful external USB devices and now comes with built-in wireless and Bluetooth connectivity. Raspberry Pi Robotics Base Kit. Works with the raspberry pi Model A, and B+, B, 2 and 3. Powered by 8 aA batteries. No soldering required. Software examples and API are provided by Dexter Industries.

Raspberry pi, raspberry pi Camera, AA Batteries, and Servo Package are all sold separately.1. 2ghz 64-bit quad-core armv8 CPU, 1 GB RAM. Bluetooth 4. 1, bluetooth Low Energy. 4 usb ports, full hdmi port, 40 gpio pins, Combined 3.5mm audio jack and composite video. Camera interface csi, display interface DSI, micro sd card slot now push-pull rather than push-push, VideoCore IV 3D graphics core.

Raspberry Pi 3 Model B Motherboard - To take full advantage of the improved power management on the Raspberry Pi 3 and provide support for even more powerful devices on the USB ports, a 2. 5a adapter is required. 802. 11n wireless lan, 10/100Mbps Lan Speed. Please see the product packaging.

More information about RASPBERRY PI RASPBERRYPI3-MODB-1GB


Similar products:


Clear Transparent assemble in 30 secs SKU00401 - sb components Latest Raspberry Pi Camera Case for V2 8 Megapixel

SB Components SKU00401 - The case is a two-piece injection-moulded abs enclosure that snaps together around the Raspberry Pi Camera. This is an elegant and innovative protective case designed specifically for the Raspberry Pi Camera. Latest raspberry Pi Camera V2 8M. 802. 11n wireless lan, 10/100Mbps Lan Speed. No soldering required. Software examples and API are provided by Dexter Industries.

Raspberry pi, aa batteries, raspberry pi Camera, and Servo Package are all sold separately.1. 2ghz 64-bit quad-core armv8 CPU, 1 GB RAM. Raspberry Pi Robotics Base Kit. Works with the raspberry pi Model A, and B+, B, 2 and 3. Powered by 8 aA batteries. It provides tough protection for the Raspberry Pi Camera and Latest Raspberry Pi Camera V2 8M.

Clear Transparent assemble in 30 secs SKU00401 - sb components Latest Raspberry Pi Camera Case for V2 8 Megapixel - The case is a two-piece injection-moulded ABS enclosure that snaps together around the Raspberry Pi Camera. Holds the raspberry Pi Camera firmly in place. Raspberry pi Camera not included- Case only. 4 usb ports, 40 gpio pins, full hdmi port, Combined 3.

More information about SB Components SKU00401


Similar products:


Gray - Building block compatible case for the Raspberry Pi official camera

Smarticase LLC cam - Raspberry Pi Robotics Base Kit. Works with the raspberry pi Model A, B, and B+, 2 and 3. Powered by 8 aA batteries. Also available in black. It provides tough protection for the Raspberry Pi Camera and Latest Raspberry Pi Camera V2 8M. Includes one case for the Raspberry Pi camera. Works with the 8 mP Raspberry Pi camera and original Pi camera.

No soldering required. Software examples and API are provided by Dexter Industries. Raspberry pi, raspberry pi Camera, AA Batteries, and Servo Package are all sold separately.1. 2ghz 64-bit quad-core armv8 CPU, 1 GB RAM. Building block compatible back. The smartpi camera case is designed to work with the official Raspberry Pi camera.

Gray - Building block compatible case for the Raspberry Pi official camera - Mounting holes to screw the case to a surface. Works with the SmartiPi Raspberry Pi case. Wall mountable Screws and double tape included. It has a building block compatible back and works well with the SmartiPi Raspberry Pi case. Please check out our Smarticase store for more info. The case is a two-piece injection-moulded abs enclosure that snaps together around the Raspberry Pi Camera.

More information about Smarticase LLC cam


Similar products:


24"/610mm - Adafruit Flex Cable for Raspberry Pi Camera

Adafruit FBA_ADA1731 - Bluetooth 4. 1, bluetooth Low Energy. The case is a two-piece injection-moulded abs enclosure that snaps together around the Raspberry Pi Camera. No soldering required. Software examples and API are provided by Dexter Industries. Raspberry pi, aa batteries, raspberry pi Camera, and Servo Package are all sold separately.

1. 2ghz 64-bit quad-core armv8 CPU, 1 GB RAM. This cable will let you swap out the stock 150mm long flex cable from a Raspberry Pi Camera either 'classic' or 'NoIR' type for a different size. Adafruit part Number: 1731. Each order comes with one cable, Pi Camera not included but we have those in the shop as well.

24"/610mm - Adafruit Flex Cable for Raspberry Pi Camera - Holds the raspberry Pi Camera firmly in place. Raspberry pi Camera not included- Case only. Latest raspberry Pi Camera V2 8M. 4 usb ports, 40 gpio pins, full hdmi port, Combined 3.5mm audio jack and composite video. Camera interface csi, display interface DSI, micro sd card slot now push-pull rather than push-push, VideoCore IV 3D graphics core.

This is a no-nonsense protective case designed specifically for the Raspberry Pi Camera and Latest Raspberry Pi Camera V2 8M. Wall mountable Screws and double tape included.

More information about Adafruit FBA_ADA1731


Similar products:


300mm / 12" - Flex CSI Cable for Raspberry Pi Camera

Raspberry Pi 1648-FBACA - This cable will let you swap out the stock 150mm long flex cable from a Raspberry Pi Camera either 'classic' or 'NoIR' type for a different size. 4 usb ports, 40 gpio pins, full hdmi port, Combined 3.5mm audio jack and composite video. Camera interface csi, display interface DSI, micro sd card slot now push-pull rather than push-push, VideoCore IV 3D graphics core.

This is a no-nonsense protective case designed specifically for the Raspberry Pi Camera and Latest Raspberry Pi Camera V2 8M. It provides tough protection for the Raspberry Pi Camera and Latest Raspberry Pi Camera V2 8M. Bluetooth 4. 1, bluetooth Low Energy. Dimensions: 50mm x 16mm 2" x 06". Adafruit part Number: 1731.

300mm / 12" - Flex CSI Cable for Raspberry Pi Camera - Building block compatible back. Wall mountable Screws and double tape included. In stock & Ready to Ship. Each order comes with one cable, Pi Camera not included but we have those in the shop as well. Available in 50mm 2", 100mm 4", 200mm 8", 300mm 12" Lengths. Raspberry pi & Camera Board NOT included.

More information about Raspberry Pi 1648-FBACA


Similar products:


Raspberry Pi 7" Touchscreen Display

Raspberry Pi 7TOUCH - Holds the raspberry Pi Camera firmly in place. It provides tough protection for the Raspberry Pi Camera and Latest Raspberry Pi Camera V2 8M. No soldering required. Software examples and API are provided by Dexter Industries. Raspberry pi, raspberry pi Camera, AA Batteries, and Servo Package are all sold separately.

1. 2ghz 64-bit quad-core armv8 CPU, 1 GB RAM. Works with the SmartiPi Raspberry Pi case. Building block compatible back. Bluetooth 4. 1, bluetooth Low Energy. Screen dimensions: 194mm x 110mm x 20mm including standoffs viewable screen size: 155mm x 86mm Screen Resolution 800 x 480 pixels 10 finger capacitive touch Connects to the Raspberry Pi board using a ribbon cable connected to the DSI port.

Raspberry Pi 7" Touchscreen Display - Works with the 8 mP Raspberry Pi camera and original Pi camera. Adafruit part Number: 1731. Adapter board is used to power the display and convert the parallel signals from the display to the serial DSI port on the Raspberry Pi. The adapter board handles power, signal conversion, and touch input conversion.

Kit contents: 7" touchscreen display adapter Board DSI Ribbon Cable 4 x Stand-offs and Screws 4 x Jumper Wires. In stock & Ready to Ship.

More information about Raspberry Pi 7TOUCH


Similar products:


CanaKit Raspberry Pi 3 Ultimate Starter Kit - 32 GB Edition

CanaKit 99151 - The ultimate starter kit includes everything in the Starter Kit plus all the electronic components needed to start using the GPIO port of the Raspberry Pi 3. Stock type: raspberry Pi >> Cables >> Camera. Note: the 32 gb microsd card may appear as 1 GB when inserted into a PC as it is pre-partitioned. Raspberry pi Camera not included- Case only.

This power supply incorporates a noise filter to provide the highest stability. 32 gb micro sd card class 10 pre-loaded with noobs, canakit 2. 5a power supply with 5 feet Micro USB Cable and Noise Filter UL Listed. This 7" touchscreen display for the Raspberry Pi is perfect for creating portable and embedded projects where a keyboard and mouse would be in the way.

CanaKit Raspberry Pi 3 Ultimate Starter Kit - 32 GB Edition - The full color display outputs up to 800 x 480 and features a capacitive touch sensing capable of detecting 10 fingers. Only two connections from the pi to the display are necessary; power from GPIO or USB connection to the DSI port. Building block compatible back. This cable will let you swap out the stock 150mm long flex cable from a Raspberry Pi Camera either 'classic' or 'NoIR' type for a different size.

High quality raspberry pi 3 case, premium quality 6. 5 feet hdmi cable, heat sink, CanaKit Full Color Quick-Start Guide. Canakit gpio to breadboard interface board, Ribbon Cable, jumper Wires, Large Breadboard, GPIO and Resistor Colors Quick Reference Cards.

More information about CanaKit 99151


Similar products:


Servo Package for the GoPiGo and Raspberry Pi

Dexter Industries - 802. 11n wireless lan, 10/100Mbps Lan Speed. This 7" touchscreen display for the Raspberry Pi is perfect for creating portable and embedded projects where a keyboard and mouse would be in the way. The full color display outputs up to 800 x 480 and features a capacitive touch sensing capable of detecting 10 fingers.

Only two connections from the pi to the display are necessary; power from GPIO or USB connection to the DSI port. This cable will let you swap out the stock 150mm long flex cable from a Raspberry Pi Camera either 'classic' or 'NoIR' type for a different size. Raspberry pi Camera not included- Case only. Latest raspberry Pi Camera V2 8M.

Servo Package for the GoPiGo and Raspberry Pi - No soldering required. Software examples and API are provided by Dexter Industries. Raspberry pi, raspberry pi Camera, AA Batteries, and Servo Package are all sold separately.1. 2ghz 64-bit quad-core armv8 CPU, 1 GB RAM. The package comes with all mounting hardware needed to attach either the ultrasonic sensor or camera to your robot.

The raspberry pi, raspberry Pi Camera, and GoPiGo Robotics Kit are sold separately. It provides tough protection for the Raspberry Pi Camera and Latest Raspberry Pi Camera V2 8M.

More information about Dexter Industries


Similar products:


CanaKit 5V 2.5A Raspberry Pi 3 B+ Power Supply / Adapter UL Listed

Cana Kit Corporation DCAR-RSP-2A5 - 5 feet cord length. Dimensions: 50mm x 16mm 2" x 06". In stock & Ready to Ship. This 7" touchscreen display for the Raspberry Pi is perfect for creating portable and embedded projects where a keyboard and mouse would be in the way. The full color display outputs up to 800 x 480 and features a capacitive touch sensing capable of detecting 10 fingers.

Only two connections from the pi to the display are necessary; power from GPIO or USB connection to the DSI port. High quality raspberry pi 3 case, premium quality 6. 5 feet hdmi cable, heat sink, CanaKit Full Color Quick-Start Guide. Canakit gpio to breadboard interface board, Ribbon Cable, Large Breadboard, jumper Wires, GPIO and Resistor Colors Quick Reference Cards.

CanaKit 5V 2.5A Raspberry Pi 3 B+ Power Supply / Adapter UL Listed - Rgb led, 8 x leds blue/red/yellow/Green, 15 x resistors, 2 x Push Button Switches. Attaches directly to the GoPiGo and is controlled by software. Mounting holes for the Raspberry Pi camera and the Ultrasonic sensor. Servo can be controlled with the Raspberry PI. Tested with all versions of the Raspberry Pi including the Pi 2 and Pi 3.

This power supply differs from typical standard 5V USB power supplies in the market in that it can deliver a full 2. 5a and still output a voltage well within the USB minimum voltage specifications.

More information about Cana Kit Corporation DCAR-RSP-2A5


Similar products: