Raspberry PI 3 Model B A1.2GHz 64-bit quad-core ARMv8 CPU, 1GB RAM

RASPBERRY PI RASPBERRYPI3-MODB-1GB - To take full advantage of the improved power management on the Raspberry Pi 3 and provide support for even more powerful devices on the USB ports, a 2. 5a adapter is required. 802. 11n wireless lan, 10/100Mbps Lan Speed. Built on the latest broadcom 2837 armv8 64 bit processor the Raspberry Pi 3 Model B is faster and more powerful than its predecessors.

4 usb ports, 40 gpio pins, full hdmi port, Combined 3.5mm audio jack and composite video. Camera interface csi, micro sd card slot now push-pull rather than push-push, display interface dsI, VideoCore IV 3D graphics core.1. 2ghz 64-bit quad-core armv8 CPU, 1 GB RAM. Bluetooth 4. 1, bluetooth Low Energy. Technical specifications: - broadcom bcm2837 64bit ARMv8 QUAD Core 64bit Processor powered Single Board Computer running at 1.

Raspberry PI 3 Model B A1.2GHz 64-bit quad-core ARMv8 CPU, 1GB RAM - 2ghz - 1gb ram - bcm43143 wifi on board - bluetooth low energy ble on board - 40pin extended gpio - 4 x usb2 ports - 4 pole stereo output and composite video port - Full size HDMI - CSI camera port for connecting the Raspberry Pi camera - DSI display port for connecting the Raspberry Pi touch screen display - MicroSD port for loading your operating system and storing data - Upgraded switched Micro USB power source now supports up to 2.

5 amps this product is made under license in both China and the U. K. Please see the product packaging.

More information about RASPBERRY PI RASPBERRYPI3-MODB-1GB

CanaKit 5V 2.5A Raspberry Pi 3 Power Supply / Adapter / Charger UL Listed

Cana Kit Corporation DCAR-RSP-2A5 - Tested with all versions of the Raspberry Pi including the Pi 2 and Pi 3. Standard 5v usb power supplies in the market have a high voltage drop when the full current is drawn from them which may cause the Raspberry Pi to reboot unexpectedly. 5 feet cord length. With this power supply, you can power the Raspberry Pi 3 at full load as well as up to 1.

2a across the four USB ports. The power supply still has about 05a of output power to spare, so even at the maximum current supported by the Raspberry Pi 3, the power supply is not at its absolute maximum. The canaKit 2. 5a raspberry pi power supply / adapter has been specially designed and tested for the new Raspberry Pi 3 and incorporates an inline noise filter for highest stability and reliable operation.

CanaKit 5V 2.5A Raspberry Pi 3 Power Supply / Adapter / Charger UL Listed - Ul listed. Micro USB plug. 2. 5a is now a requirement for the Raspberry Pi 3. Output 5v dc 2. 5a regulated input 100V to 240V AC. This power supply differs from typical standard 5V USB power supplies in the market in that it can deliver a full 2. 5a and still output a voltage well within the USB minimum voltage specifications.

More information about Cana Kit Corporation DCAR-RSP-2A5


Similar products:


Official Raspberry Pi 3 Case - Black/Grey

Raspberry Pi RPI3CASE-BG - Removable side panels with easy access to the GPIO port. Designed with HATs in mind and featuring multiple removable panels. Official case for the Raspberry Pi from the Raspberry Pi Foundation. Ul listed. Output 5v dc 2. 5a regulated input 100V to 240V AC. Tested with all versions of the Raspberry Pi including the Pi 2 and Pi 3.

Micro USB plug. Designed with Pi HAT's in mind. Removable lid provides easy access to the camera and display ports. Enclose your board as much or as little as necessary to best suit your latest project. Removable Top Frame. The official case of the Raspberry Pi Foundation has been refreshed for the Pi 3. 5 feet cord length.

More information about Raspberry Pi RPI3CASE-BG


Similar products:


KuGi Raspberry Pi 3 Model B case PC Protective Case with 2x Heatsinks for Raspberry Pi 3 Model B, Pi 2 Model B & Pi Model B+ Clear

Vostrostone CASE-Raspberry-Pi 3-Model B-02A - The case we sell is just a case, raspberry Pi 2 /3 Model B / PI 2 Model B+ is not include. Removable side panels with easy access to the GPIO port. The case two parts snap together and can hold the Pi board securely in place, lessening the chance of an accidental short circuit, and you will feel more confident when grabbing the Pi to plug/unplug cables.

And the top panel is designed for easy access to the GPIO pins and easy to plug and remove anything you will be connecting to it. This case is made from high quality PC material, which has the advantages of good high temperature resistance, impact resistance. Official case for the Raspberry Pi from the Raspberry Pi Foundation.

KuGi Raspberry Pi 3 Model B case PC Protective Case with 2x Heatsinks for Raspberry Pi 3 Model B, Pi 2 Model B & Pi Model B+ Clear - Access to all controls and features. Nice appearance, good touch feeling Slim, form-fitted and lightweight. Button up each corner to achieve the best protection, Supporting function, convenint to use. 2. The case design has enough room to add heat sinks, and the bottom ventilation design allows sufficient air circulation.

Output 5v dc 2. 5a regulated input 100V to 240V AC. Removable Top Frame.

More information about Vostrostone CASE-Raspberry-Pi 3-Model B-02A


Similar products:


Smraza 5 in 1 Starter Kit for Raspberry Pi 3B, 2B with 9 layers Case, 5V/2.5A Power Supply ,1 pcs Fan, 3 pcs Heatsinks and Micro USB with On/Off Switch SW13

Smraza SW13s - Note 1. The 9 layers case contains different componentswith different colors, it need to follow the detailed guide. Designed with Pi HAT's in mind. 2. Then you need to peel paper off the plastic pieces before you assemble it. Tested with all versions of the Raspberry Pi including the Pi 2 and Pi 3. Access to all controls and features.

Nice appearance, good touch feeling Slim, form-fitted and lightweight. 9 layers protection case with instructions: Clear and black layers, easy to assemble it by using 4 nylon bolts without tools. With 1pc mute fan for : when you use it for working, it can reduce the temperature quickly and improve its ventilation by a mute function.

Smraza 5 in 1 Starter Kit for Raspberry Pi 3B, 2B with 9 layers Case, 5V/2.5A Power Supply ,1 pcs Fan, 3 pcs Heatsinks and Micro USB with On/Off Switch SW13 - 3 pcs aluminium heatsinks : specially designed for Raspberry Pi 3B and 2B to cool down the board, there has stickiness on the back of the heat sinks. Micro usb cable with on / off switch, no need to pull the cable to restart your Pi, just press the button to turn your Pi on and off Not support data transfer.

5v/2. 5a power supply charger for raspberry 3b, 2b:it tested with all versions of the Raspberry Pi including the Pi 2B and Pi 3B, and it is enough for your raspberry pi and your USB device. Package included: 1 clear case x1 2 heatsinks x3 3 5V/2. 5a power supply adapter x1 4 mini fan x1 5 micro usb cable length:3 feet/1meter x1 About Smraza: We are a leading manufacturer of electronic components for Arduino and Raspberry Pi.

If you have any technical questions, please feel free to contact our support staff via email.

More information about Smraza SW13s


Similar products:


Radios and High Gain Antennas - Stratux 1090ES & UAT

Stratux - Button up each corner to achieve the best protection, Supporting function, convenint to use. 9 layers protection case with instructions: Clear and black layers, easy to assemble it by using 4 nylon bolts without tools. With 1pc mute fan for : when you use it for working, it can reduce the temperature quickly and improve its ventilation by a mute function.

3 pcs aluminium heatsinks : specially designed for Raspberry Pi 3B and 2B to cool down the board, there has stickiness on the back of the heat sinks. Micro usb cable with on / off switch, no need to pull the cable to restart your Pi, just press the button to turn your Pi on and off Not support data transfer.

Radios and High Gain Antennas - Stratux 1090ES & UAT - 5v/2. 5a power supply charger for raspberry 3b, 2b:it tested with all versions of the Raspberry Pi including the Pi 2B and Pi 3B, and it is enough for your raspberry pi and your USB device. Plug and play with and supported by Stratux project. Includes two SDRs each programmed for tuned antennas. R820t2 + rtl2832u.

High gain antennas. 30% lower power consumption and optimized heat dissipation. Removable lid provides easy access to the camera and display ports. Output 5v dc 2.

More information about Stratux


Similar products:


SanDisk Ultra 32GB microSDHC UHS-I Card with Adapter, Grey/Red, Standard Packaging SDSQUNC-032G-GN6MA

Sandisk SDSQUNC-032G-GN6MA - Removable lid provides easy access to the camera and display ports. Removable side panels with easy access to the GPIO port. Removable Top Frame. Up to 80 mb/s transfer speed, Comes with SD adapter for use in cameras. The sandisk ultra card is rated class 10 for Full HD video and comes with a SD adapter and a ten-year warranty.

Capture, carry and keep more high-quality photos and full HD video on your Android smartphone or tablet. Specially designed for raspberry pi 3 model B, Pi 2 Model B & Pi Model B+. Built to perform in extreme conditions, shock proof, SanDisk Ultra micro SDHC and micro SDXC cards are water proof, temperature proof, X-ray proof and magnet proof.

SanDisk Ultra 32GB microSDHC UHS-I Card with Adapter, Grey/Red, Standard Packaging SDSQUNC-032G-GN6MA - The sandisk memory zone app, available on the Google Play store, access, makes it easy to view, and back up your files from your phone's memory. To help your smartphone run at its peak performance, set the app to automatically off-load files from your smartphone's internal memory to the card. Output 5v dc 2.

5a regulated input 100V to 240V AC. Tested with all versions of the Raspberry Pi including the Pi 2 and Pi 3. Access to all controls and features. Nice appearance, good touch feeling Slim, form-fitted and lightweight.

More information about Sandisk SDSQUNC-032G-GN6MA


Similar products:


NES case for Raspberry Pi 3,2 and B+ by Old Skool Tools

Old Skool Tools 150719830 - Note. The air vents provide good ventilation while in use. The nintendo entertainment System inspired Raspberry Pi case was designed to relive childhood memories. Water proof, temperature proof, shock proof, X-ray proof and magnet proof. Memory zone app lets you auto-manage media and memory for peak phone performance, Ten-year limited warranty.

Removable lid provides easy access to the camera and display ports. Removable side panels with easy access to the GPIO port. Micro USB plug. Easy to slip on your device, yet stays on securely, protects your Raspberry from scratches and damage. 5 feet cord length. Class 10 for full HD video recording and playback.

NES case for Raspberry Pi 3,2 and B+ by Old Skool Tools - The nes case provides access to every outlet of the Raspberry Pi without opening the case. Tested with all versions of the Raspberry Pi including the Pi 2 and Pi 3. Easy access to the SD-Card and all other ports without opening the case. The case two parts snap together and can hold the Pi board securely in place, lessening the chance of an accidental short circuit, and you will feel more confident when grabbing the Pi to plug/unplug cables.

. Button up each corner to achieve the best protection, Supporting function, convenint to use.

More information about Old Skool Tools 150719830


Similar products:


Stratux Software Card pre-programmed Micro SD card

Stratux 6486856 - Pre-programmed with the latest stable Stratux version. Nes case specifically designed for Raspberry Pi 3, 2 and B+. Specially designed for raspberry pi 3 model B, Pi 2 Model B & Pi Model B+. 9 layers protection case with instructions: Clear and black layers, easy to assemble it by using 4 nylon bolts without tools.

With 1pc mute fan for : when you use it for working, it can reduce the temperature quickly and improve its ventilation by a mute function. 3 pcs aluminium heatsinks : specially designed for Raspberry Pi 3B and 2B to cool down the board, there has stickiness on the back of the heat sinks. Micro usb cable with on / off switch, no need to pull the cable to restart your Pi, just press the button to turn your Pi on and off Not support data transfer.

Stratux Software Card pre-programmed Micro SD card - 5v/2. 5a power supply charger for raspberry 3b, 2b:it tested with all versions of the Raspberry Pi including the Pi 2B and Pi 3B, and it is enough for your raspberry pi and your USB device. Plug and play with and supported by Stratux project. Includes two SDRs each programmed for tuned antennas. R820t2 + rtl2832u.

High gain antennas. 30% lower power consumption and optimized heat dissipation. Ideal for premium Android based smartphones and tablets.

More information about Stratux 6486856


Similar products:


Enokay Power Supply for Raspberry Pi 5V 2.5A Micro USB Charger Adapter with On Off Switch

Shen Zhen Eno Electronic Co.,Ltd - Easy access to the SD-Card and all other ports without opening the case. Water proof, shock proof, temperature proof, X-ray proof and magnet proof. Memory zone app lets you auto-manage media and memory for peak phone performance, Ten-year limited warranty. Output 5v dc 2. 5a regulated input 100V to 240V AC.

. Micro usb cable with on / off switch for your convenience. Class 10 for full HD video recording and playback. 9 layers protection case with instructions: Clear and black layers, easy to assemble it by using 4 nylon bolts without tools. With 1pc mute fan for : when you use it for working, it can reduce the temperature quickly and improve its ventilation by a mute function.

Enokay Power Supply for Raspberry Pi 5V 2.5A Micro USB Charger Adapter with On Off Switch - 3 pcs aluminium heatsinks : specially designed for Raspberry Pi 3B and 2B to cool down the board, there has stickiness on the back of the heat sinks. Micro usb cable with on / off switch, no need to pull the cable to restart your Pi, just press the button to turn your Pi on and off Not support data transfer.

5v/2. 5a power supply charger for raspberry 3b, 2b:it tested with all versions of the Raspberry Pi including the Pi 2B and Pi 3B, and it is enough for your raspberry pi and your USB device. Plug and play with and supported by Stratux project. Includes two SDRs each programmed for tuned antennas.

More information about Shen Zhen Eno Electronic Co.,Ltd


Similar products:


Raspberry Pi 7" Touchscreen Display

RASPBERRY PI - This firm design, made out of plastic is held together with the 4 provided bolts. Button up each corner to achieve the best protection, Supporting function, convenint to use. Latest version of Raspbian OS required to operate correctly. Output 5v dc 2. 5a regulated input 100V to 240V AC. Kit contents: 7" touchscreen display adapter board DSI Ribbon Cable 4 x Stand-offs and Screws 4 x Jumper Wires Technical Specifications 7" Touchscreen Display.

Specially designed for raspberry pi 3 model B, Pi 2 Model B & Pi Model B+. No need to pull the cable to restart or reboot your PI, just press the button to turn your Pi on and off. Water proof, temperature proof, shock proof, X-ray proof and magnet proof. Memory zone app lets you auto-manage media and memory for peak phone performance, Ten-year limited warranty.

Raspberry Pi 7" Touchscreen Display - 9 layers protection case with instructions: Clear and black layers, easy to assemble it by using 4 nylon bolts without tools. With 1pc mute fan for : when you use it for working, it can reduce the temperature quickly and improve its ventilation by a mute function. 3 pcs aluminium heatsinks : specially designed for Raspberry Pi 3B and 2B to cool down the board, there has stickiness on the back of the heat sinks.

Micro usb cable with on / off switch, no need to pull the cable to restart your Pi, just press the button to turn your Pi on and off Not support data transfer. 5v/2.

More information about RASPBERRY PI


Similar products: