NooElec NESDR Mini 2+ 0.5PPM TCXO RTL-SDR & ADS-B USB Receiver Set w/ Antenna, Suction Mount, Female SMA Adapter & Remote Control, RTL2832U & R820T2 Tuner. Low-Cost Software Defined Radio.

NooElec Inc. NESDR Mini 2+ - A free female sma adapter is also included at no cost for those looking to connect SMA antennas to the NESDR Mini 2+. Full 2-year product warranty! The connector type on the antenna and USB board is MCX--male MCX on the antenna, female MCX on the SDR. A male mcx to female smA adapter and strong magentic antenna suction mount included as standard.

R820t2 tuner provides substantial performance improvements over R820T-based devices. Outperforms many devices 10x its cost! These units are based on the R820T2 tuner IC made by Rafael Micro. Power consumption has been reduced while improving sensitivity and lowering the noise floor. Want hf too? take a look at the ham it Up which will allow you to listen all the way down to 100kHz or lower with impeccable sensitivity.

NooElec NESDR Mini 2+ 0.5PPM TCXO RTL-SDR & ADS-B USB Receiver Set w/ Antenna, Suction Mount, Female SMA Adapter & Remote Control, RTL2832U & R820T2 Tuner. Low-Cost Software Defined Radio. - The nesdr mini 2+ is tuned for sdr usage, Japanese fabricated, including a high-accuracy, GPS-rated 0.5ppm tcxo crystal; re-designed RF-suitable power supply; and improved capacitors and inductors compared to generic devices. This provides substantial performance improvements over R820T. They have a frequency capability of approximately 25MHz-1750MHz, though this can vary slightly from unit to unit.

The perfect device for learning software defined radio, on the cheap. There is also an rtl2832 rtl2832u ic on board of course, which acts as the demodulator and USB interface.

More information about NooElec Inc. NESDR Mini 2+

DHT Electronics RF coaxial coax cable assembly SMA male to MCX male right angle 6''

DHT LLC RG084 - Dht electronics brand is a registered trademark of DHT LLC. Only authorized seller of DHT Electronics can sell under DHT Electronics listings. Cable length: 6 inches; impedance :50 ohm;Compatible with any SDR with SMA or MCX input connector. Cable type: coaxial Quality Low Loss RG316. Rf coaxial coax cable assembly sma male to MCX male right angle 6 inches Package include:1 x SMA to MCX cable.

. Connector material:Pure brass with Great connectivity. Not Alloy.

More information about DHT LLC RG084


Similar products:


NooElec Ham It Up v1.3 - NooElec RF Upconverter For Software Defined Radio. Works With Most SDRs Like HackRF & RTL-SDR RTL2832U with E4000, FC0013 or R820T Tuners; MF/HF Converter With SMA Jacks

NooElec Inc. Ham It Up v1.3 - Free bonus: we had space left on the PCB, so rather than waste it we have added a noise source circuit at no additional cost. Open-hardware design! Full documentation available: http://opendous. Org/Upconverter. We have even populated most of the components for you. Dht electronics brand is a registered trademark of DHT LLC.

Only authorized seller of DHT Electronics can sell under DHT Electronics listings. Listen to all hf, down to 100kHz and below, with nearly any software defined radio! Proudly designed, fabricated and assembled in the USA and Canada! Brand new & improved v1. 3 version of our popular upconverter is now available for immediate shipment! Improvements include increased sensitivity, fully-assembled broadband RF noise-source circuit, optional battery-powered operation, side-mounted LED indicators, ultra-low voltage noise floor, u.

NooElec Ham It Up v1.3 - NooElec RF Upconverter For Software Defined Radio. Works With Most SDRs Like HackRF & RTL-SDR RTL2832U with E4000, FC0013 or R820T Tuners; MF/HF Converter With SMA Jacks - Fl socket for optional external clock injection, much more! these improvements are in addition to the standard features of the Ham It Up line, ESD protection on the input to product your Ham It Up and SDR, enable/disable passthrough toggle switch, ultra-high-Q & low ESR components used for all filters, PTC protection fuse on power input, surface-mount high-accuracy oscillator and much, including female SMA input and output jacks, and open-hardware design with full published circuitry and specifications.

Cable length: 6 inches; impedance :50 ohm;Compatible with any SDR with SMA or MCX input connector. A new enclosure, or enclosure upgrade kit, is required. Ham/amateur radio enthusiasts, rejoice! our MF/HF converter for software defined radio will allow you to listen to MF and HF through your existing software defined radio SDR.

More information about NooElec Inc. Ham It Up v1.3


Similar products:


Extruded Aluminum Enclosure Kit, Blue, for Ham It Up v1.3 RF Upconverter for NESDR and RTL-SDR radios

NooElec Inc. 100672 - Package include:1 x SMA to MCX cable. Full 1-year warranty. Enclosures for v1. 2 and earlier are still available in our webstore for a limited time. A better option than unshielded cases, most certainly, and fairly priced as well. The enclosures include the appropriate standoffs and screws to mount the upconverter.

Ample room inside the case to make modifications and even include a dongle inside the case if you are so inclined. Ham it up upconverter sold separately. Dht electronics brand is a registered trademark of DHT LLC. Only authorized seller of DHT Electronics can sell under DHT Electronics listings. Listen to all hf, down to 100kHz and below, with nearly any software defined radio!

Extruded Aluminum Enclosure Kit, Blue, for Ham It Up v1.3 RF Upconverter for NESDR and RTL-SDR radios - Antenna protection on the RF input, in-circuit in both enable and passthrough mode. Cable length: 6 inches; impedance :50 ohm;Compatible with any SDR with SMA or MCX input connector. High-quality custom aluminum enclosure for Ham It Up v1. 3. The color-matched side panels are included as well. Two color options are available - metallic blue with laser-etched labeling, and silver with color silkscreen labeling.

Open-hardware design! Full documentation available: http://opendous.

More information about NooElec Inc. 100672


Similar products:


Extruded Aluminum Enclosure Kit, Blue, for NESDR Mini, NESDR Mini+, NESDR Mini 2, TV28T v1, TV28T v2 & Select Other RTL-SDRs

NooElec Inc. - Open-hardware design! Full documentation available: http://opendous. Org/Upconverter. Reduces EMI for improved sensitivity. Cable type: coaxial Quality Low Loss RG316. The shielded enclosures will provide protection from the nasty electromagnetic environment surrounding most computers and, therefore, improved sensitivity in SDR applications.

The enclosures are tested to fit the following rtl-sdr models: nesdr mini, tv28T v1, NESDR Mini 2, NESDR Mini 2+, NESDR Mini+, TV28T v2. Two color options are available - metallic blue with laser-etched labeling, and silver with color silkscreen labeling. Connector material:Pure brass with Great connectivity.

Extruded Aluminum Enclosure Kit, Blue, for NESDR Mini, NESDR Mini+, NESDR Mini 2, TV28T v1, TV28T v2 & Select Other RTL-SDRs - Not Alloy. These high-quality aluminum enclosures or aluminium, for our mates across the pond are custom-made by NooElec in the same colors and finishes as our Ham It Up enclosures. Ample room inside the case to make modifications and even include a dongle inside the case if you are so inclined. Ham it up upconverter sold separately.

High-quality custom aluminum enclosure for many RTL-SDR models. Full 1-year warranty. Includes enclosure, end panels, and screws.

More information about NooElec Inc.


Similar products:


NooElec Balun One Nine - Tiny Low-Cost 1:9 HF Antenna Balun with Antenna Input Protection for Ham It Up, SDR and Many Other Applications!

NooElec Inc. Balun One Nine - Cable length: 6 inches; impedance :50 ohm;Compatible with any SDR with SMA or MCX input connector. An excellent way to attach a long wire antenna to the Ham It Up, this 1:9 balun has an SMA output port and high-quality spring-type terminal block input for your coax. Proudly made in the USA and Canada with high-quality components!

The esd protection is excellent--it passes IEC61000-4-2, an 8kV contact discharge test, with a response time of just 300ps. Silkscreened or etched labeling. 1:9 hf antenna balun for long wire antennas; includes excellent ESD protection on input. Great match for attaching a long wire to the Ham It Up. Fully assembled, and easy to use.

NooElec Balun One Nine - Tiny Low-Cost 1:9 HF Antenna Balun with Antenna Input Protection for Ham It Up, SDR and Many Other Applications! - Excellent specifications & low insertion loss. Only 39. 2mm x 13. 0mm and 5g! At 39. 2mm x 13. 0mm in total size including connectors! this balun was designed to be light in weight and light on your wallet. Very low insertion loss of -1.

More information about NooElec Inc. Balun One Nine


Similar products:


NooElec RaTLSnake M5 - Premium 3-Antenna Bundle for NESDR, RTL-SDR, HackRF, and other Software Defined Radios

NooElec Inc. 4330080565 - Full 1-year warranty. Dht electronics brand is a registered trademark of DHT LLC. Only authorized seller of DHT Electronics can sell under DHT Electronics listings. Listen to all hf, down to 100kHz and below, with nearly any software defined radio! The antenna cable leading from the antenna base is 2m of high-quality rg-58 with a male SMA connector on the end--it is long enough for most remote SDR applications, has much lower loss than other antenna cables in this price range, and makes connectivity to SMA-input SDRs a snap! Three high quality antenna masts are included at no additional cost.

The powerful magnet enables allows for heavy antenna masts to be attached without deflection of the antenna base or mast from its ideal position. Ample room inside the case to make modifications and even include a dongle inside the case if you are so inclined. Ham it up upconverter sold separately. High-quality custom aluminum enclosure for many RTL-SDR models.

NooElec RaTLSnake M5 - Premium 3-Antenna Bundle for NESDR, RTL-SDR, HackRF, and other Software Defined Radios - Includes antenna base and 3 antenna masts--helical, DVB-T2 and telescopic--for wideband reception. Metal case helps to protect PCB from stray EMI, improving sensitivity. Includes all required hardware to mount your PCB! Lastly, a rather unique helical corkscrew antenna is included. 1:9 hf antenna balun for long wire antennas; includes excellent ESD protection on input.

More information about NooElec Inc. 4330080565


Similar products:


HiLetgo 315Mhz RF Transmitter and Receiver Module link kit for Arduino/ARM/MCU/Raspberry pi

HiLetgo® 3-01-0082 - Working current: 20-28mA. Resonance mode: sound wave resonance SAW. Modulation mode: ASK /OOK. Rx working voltage: 5. 0vdc. Ample room inside the case to make modifications and even include a dongle inside the case if you are so inclined. Ham it up upconverter sold separately. High-quality custom aluminum enclosure for many RTL-SDR models.

Silkscreened or etched labeling. Reduces EMI for improved sensitivity. Static current:4MA. Working principle: single chip superregeneration receiving. Open-hardware design! Full documentation available: http://opendous. Org/Upconverter. Heavy-duty, wide-band antenna bundle for RTL-SDR with 2m RG58 cable. Proudly made in the USA and Canada with high-quality components!

HiLetgo 315Mhz RF Transmitter and Receiver Module link kit for Arduino/ARM/MCU/Raspberry pi - Metal case helps to protect PCB from stray EMI, improving sensitivity. Includes all required hardware to mount your PCB! High-quality custom aluminum enclosure for Ham It Up v1. 3. 1:9 hf antenna balun for long wire antennas; includes excellent ESD protection on input.

More information about HiLetgo® 3-01-0082


Similar products:


66cm / 26in - 1090MHz ADS-B Antenna

FlightAware OMEL-MR-PN-6695713 - Mounting bracket and U-bolts included. Working current: 20-28mA. Resonance mode: sound wave resonance SAW. Modulation mode: ASK /OOK. Rx working voltage: 5. 0vdc. Antenna base is constructed from heavy-gauge metal for resilience and longevity. 2 year warranty direct from NooElec. Dht electronics brand is a registered trademark of DHT LLC.

Only authorized seller of DHT Electronics can sell under DHT Electronics listings. Listen to all hf, down to 100kHz and below, with nearly any software defined radio! Silkscreened or etched labeling. The antenna can be used outdoors, mounted on a mast that is 2. 5cm to 4cm in diameter, or installed indoors against a window.

66cm / 26in - 1090MHz ADS-B Antenna - Proudly made in the USA and Canada with high-quality components! Connector material:Pure brass with Great connectivity. Not Alloy. Available in metallic blue and silver. Package include:1 x SMA to MCX cable. 5db gain. Metal case helps to protect PCB from stray EMI, improving sensitivity.

More information about FlightAware OMEL-MR-PN-6695713


Similar products:


NooElec ADS-B Discovery 5dBi High Gain Antenna Bundle - 1090MHz & 978MHz Antenna Bundle for SMA and MCX-Connected Software Defined Radios SDRs

NooElec Inc. 100714 - As such, these antennas can be used with MCX-input or SMA-input devices without further purchase. Includes enclosure, end panels, and screws. Each antenna is only 20g and 19cm 7. 5" long, 5dbi, with a VSWR of 1. 5:1 or better at their respective center frequencies. Reduces EMI for improved sensitivity. Male sma connector on antenna cable for easy connectivity to all SMA-input radios like our NESDR SMArt series and HackRF One.

High-quality custom aluminum enclosure for Ham It Up v1. 3. Silkscreened or etched labeling. A pair of 5dbi, respectively, lightweight antennas with 978MHz and 1090MHz center frequencies, medium-sized, designed for portable ADS-B applications. Ample room inside the case to make modifications and even include a dongle inside the case if you are so inclined.

NooElec ADS-B Discovery 5dBi High Gain Antenna Bundle - 1090MHz & 978MHz Antenna Bundle for SMA and MCX-Connected Software Defined Radios SDRs - Ham it up upconverter sold separately. High-quality custom aluminum enclosure for many RTL-SDR models. Static current:4MA. Working principle: single chip superregeneration receiving. Indoor/outdoor waterproof 1090MHz antenna. 2 year warranty direct from NooElec.

More information about NooElec Inc. 100714


Similar products:


DHT Electronics Handheld Antenna Cable SMA male to UHF SO-239 Female Connectors 6''

DHT LLC RG080 - Includes enclosure, end panels, and screws. Ample room inside the case to make modifications and even include a dongle inside the case if you are so inclined. Ham it up upconverter sold separately. High-quality custom aluminum enclosure for many RTL-SDR models. Tx working voltage: 3v-12v. Antenna protection on the RF input, in-circuit in both enable and passthrough mode.

Commonly used in rf applications, coaxial cable, Wireless LAN Devices, Wi-Fi Radios External Antenna, antennas, >1000 Times Mating Life Time. Cable length: 6 inches; cable type: Flexiable Coaxial Quality Low Loss RG316. 1:9 hf antenna balun for long wire antennas; includes excellent ESD protection on input.

DHT Electronics Handheld Antenna Cable SMA male to UHF SO-239 Female Connectors 6'' - Great match for attaching a long wire to the Ham It Up. Fully assembled, and easy to use. Excellent specifications & low insertion loss. Only 39. 2mm x 13. 0mm and 5g! Available in metallic blue and silver. Heavy-duty, wide-band antenna bundle for RTL-SDR with 2m RG58 cable.

More information about DHT LLC RG080


Similar products: