NooElec Low Noise Amplifier LNA & SAW Filter Module For Outernet and Other Inmarsat Applications

NooElec Inc. 4331050947 - As such, it should be used for reception of frequencies between 1. 50ghz-1. 58ghz. Perfect for outernet projects! The module should be powered via low-noise bias-tee which supplies between 3. 0v-5. 5v. A high-quality, high-performance, complete LNA & SAW filter module for Inmarsat at a very affordable price. Female sma connectors on input and output for easy connectivity.

Very low 1dB nominal noise figure. Powered via bias-tee, 3. 0-5. 5vdc. A complete lna & saw filter module for Inmarsat applications like the Outernet project. 4 mounting holes are available on the PCB for various mounting options. It must be capable of supplying a minimum of 35mA of current. Low current consumption requirements of 35mA max.

NooElec Low Noise Amplifier LNA & SAW Filter Module For Outernet and Other Inmarsat Applications - Works great with nesdr smartee xtr! amazon SKU: B06Y1D7P48. The lna is a dual-stage design with a very low noise figure of 1dB nominal. Works great with nesdr smartee xtr! amazon skus: b06y1d7p48 and b06y1gn5rpas with all other high-frequency applications, we recommend using in conjunction with an SDR specifically designed for long-term, high-frequency performance without degradation, such as an E4000-based RTL-SDR or a HackRF.

Quad mounting holes for a variety of installation options.

More information about NooElec Inc. 4331050947

DHT Electronics RF coaxial coax assembly SMA male to SMA male 20 inches

DHT LLC RG032 - Cable length: 50 inches; cable type: Flexiable Coaxial Quality Low Loss RG316. Impedance :50 ohm. Package content : 1 x SMA Cable. Dht electronics brand is a registered trademark of DHT LLC. Only authorized seller of DHT Electronics can sell under DHT Electronics listings. Connector material:Pure Copper with Great connectivity.

Not Alloy.

More information about DHT LLC RG032


Similar products:


RTL-SDR Blog R820T2 RTL2832U 1PPM TCXO SMA Software Defined Radio Dongle Only

RTL-SDR Blog - Full info available on the improvement datasheet here goo. Gl/jtnprb requires a USB 2. 0 port and works on most USB 3. 0 ports. Hf mode works in direct sampling mode. Please note that this is the dongle only, no antennas are included. Connector material:Pure Copper with Great connectivity. Not Alloy. Works on windows, linux, macOS, Android and even embedded Linux computers like the Raspberry Pi.

Uses a sma female antenna port. Cable length: 50 inches; cable type: Flexiable Coaxial Quality Low Loss RG316. Package content : 1 x SMA Cable. Please feel free to contact us for support. Dht electronics brand is a registered trademark of DHT LLC. Only authorized seller of DHT Electronics can sell under DHT Electronics listings.

RTL-SDR Blog R820T2 RTL2832U 1PPM TCXO SMA Software Defined Radio Dongle Only - Includes 1x rtl-sdr blog brand r820t2 rtl2832u 1ppm tcxo HF Bias Tee SMA Dongle V3. Please go to our free RTL-SDR Quickstart Guide at rtl-sdr. Com/qsg for installation instructions. Perfect for use as a computer based radio scanner with free software like SDR#, Linrad, HDSDR, SDR-Radio, GQRX or SDR Touch on Android.

Tunes from 500 kHz to 1.

More information about RTL-SDR Blog


Similar products:


HiLetgo 0.1-2000MHz RF Wide Band Amplifier 30dB High Gain Low Noise LNA Amplifier

HiLetgo® - Great for many applications including general radio scanning, meteor scatter monitoring, noaa APT weather satellites, radio astronomy, public safety radio, ais, air traffic control, POCSAG, weather balloons, ACARS, adsb, P25 digital voice, trunked radio, DAB, APRS, or for use as a low cost panadapter with a traditional ham radio.

Several improvements over generic brands including use of the R820T2 tuner, a 1 PPM temperature compensated oscillator TCXO, SMA F connector, improved component tolerances, aluminium case with thermal pad for passive cooling, software activatable bias tee circuit. Can tune from 500 khz to 1. 7 ghz and has up to 3.

HiLetgo 0.1-2000MHz RF Wide Band Amplifier 30dB High Gain Low Noise LNA Amplifier - 2 mhz 2. 4 mhz stable of instantaneous bandwidth. Operating frequency01-2000mhz. 2. Amplifier working frequency of the lower limit is subject to input and output capacitor, the default value is 01 uf, working to 01 mhz. 3. When the power supply voltage changes in 5-8 v, to control the gain of the amplifier, which suitable for radio frequency receive front-end circuit, it can be used as a variable gain amplifier, gain increases with the increase of the power supply voltage, using DA control power supply voltage, automatic gain control 4.

More information about HiLetgo®


Similar products:


5 Pcs Gold Tone SMA Male to SMA Male Connector RF Coaxial Adapter Connector

uxcell a12110200ux0694 - Impedance :50 ohm. High gain low Noise LNA Amplifier. Male to male SMA Connector Adapter. Product name : sma male to sma male RF Connector;Type : Male to Male. Color : gold tone;Weight : 26g. Internal thread : 1/4-36UNS. Power supply voltage: 6-12 VDC. Uses a sma female antenna port. Package content : 1 x SMA Cable. Hf reception below 24 MHz runs in direct sampling mode.

Connector material:Pure Copper with Great connectivity. Not Alloy. Cable length: 50 inches; cable type: Flexiable Coaxial Quality Low Loss RG316. Please note that this is the dongle only, no antennas are included. 01-2000mhz rf wide Band Amplifier. 2. 1 x 08cm / 08" x 031" l * d. Great for many applications including general radio scanning, trunked radio, public safety radio, weather balloons, ACARS, NOAA APT weather satellites, ais, adsb, P25 digital voice, radio astronomy, meteor scatter monitoring, POCSAG, DAB, APRS, air traffic control, or for use as a low cost panadapter with a traditional ham radio.

5 Pcs Gold Tone SMA Male to SMA Male Connector RF Coaxial Adapter Connector - Several improvements over generic brands including use of the R820T2 tuner, SMA F connector, improved component tolerances, aluminium case with thermal pad for passive cooling, a 1 PPM temperature compensated oscillator TCXO, software activatable bias tee circuit.

More information about uxcell a12110200ux0694


Similar products:


Tiny Low-Cost 1:9 HF Antenna Balun with Antenna Input Protection for Ham It Up, SDR and Many Other Applications! - NooElec Balun One Nine

NooElec Inc. Balun One Nine - Meet 'balun one Nine', a small, cost-effective balun. Great for many applications including general radio scanning, meteor scatter monitoring, aprs, NOAA APT weather satellites, air traffic control, trunked radio, DAB, radio astronomy, ACARS, ais, POCSAG, weather balloons, public safety radio, P25 digital voice, adsb, or for use as a low cost panadapter with a traditional ham radio.

Several improvements over generic brands including use of the R820T2 tuner, SMA F connector, a 1 PPM temperature compensated oscillator TCXO, aluminium case with thermal pad for passive cooling, improved component tolerances, software activatable bias tee circuit. Can tune from 500 khz to 1. 7 ghz and has up to 3.

Tiny Low-Cost 1:9 HF Antenna Balun with Antenna Input Protection for Ham It Up, SDR and Many Other Applications! - NooElec Balun One Nine - 2 mhz 2. 4 mhz stable of instantaneous bandwidth. Color : gold tone;Weight : 26g. Operating frequency01-2000mhz. Please note that this is the dongle only, no antennas are included. 01-2000mhz rf wide Band Amplifier. Balun one nine includes an antennaGuard varistor on the input, protecting your SDR setup from spurious ESD.

More information about NooElec Inc. Balun One Nine


Similar products:


108 MHz Block by RTL-SDR Blog - Broadcast FM Block Filter 88

RTL-SDR Blog 4330366327 - Cable length: 50 inches; cable type: Flexiable Coaxial Quality Low Loss RG316. Internal thread : 1/4-36UNS. Uses smA female connectors. High gain low Noise LNA Amplifier. Color : gold tone;Weight : 26g. Comes with a free SMA male to SMA male adapter. Blocks the broadcast fm band between 88 - 108 MHz with over 50dB of attenuation.

Insertion loss is less than 05 db between 0 - 1 GHz, and mostly less than 1. 5 db between 1 - 3 GHz. Uses sma female connectors. Please note that this is the dongle only, no antennas are included. 01-2000mhz rf wide Band Amplifier. Includes 1x rtl-sdr blog broadcast fm band-Stop Filter and 1x SMA male to SMA male adapter.

108 MHz Block by RTL-SDR Blog - Broadcast FM Block Filter 88 - Insertion loss is less than 05 db between 0 - 1 gHz, and mostly less than 1. 5 db between 1 - 3 GHz. Material : alloy;total size approx. Tv installs normally use F-TYPE or PAL connectors. Blocks the broadcast fm band between 88 - 108 MHz with over 50dB of attenuation.

More information about RTL-SDR Blog 4330366327


Similar products:


DZS Elec 2pcs RG316 Wire Jumper 15cm SMA Male to SMA Male with Connecting Line RF Coaxial Coax Cable Antenna Extender Cable Adapter Jumper

DZS Elec 4328315897 - Feature: adapter: sma male to sma male name: rf coaxial wire jumper type: patch cord, antenna, Refit Cable, Wire Jumper Material: Copper Cable Type: RG316 high temperature cable Length: 15cm Impedance: 50 Ohm Applications: router, signal enhancer, wireless adapter etc. Connector material:Pure Copper with Great connectivity.

Not Alloy. Material : alloy;total size approx. Consisted of high quality rg316 cable and all copper SMA Male to SMA Male adapter, high temperature resistance, acid resistance, high frequency low loss and low impedance, corrosion resistance, to ensure high quality communication. Uses a sma female antenna port.

DZS Elec 2pcs RG316 Wire Jumper 15cm SMA Male to SMA Male with Connecting Line RF Coaxial Coax Cable Antenna Extender Cable Adapter Jumper - Impedance :50 ohm. Great for many applications including general radio scanning, dab, noaa apt weather satellites, ais, weather balloons, APRS, P25 digital voice, trunked radio, public safety radio, ACARS, meteor scatter monitoring, POCSAG, air traffic control, adsb, radio astronomy, or for use as a low cost panadapter with a traditional ham radio.

Several improvements over generic brands including use of the R820T2 tuner, SMA F connector, improved component tolerances, aluminium case with thermal pad for passive cooling, a 1 PPM temperature compensated oscillator TCXO, software activatable bias tee circuit. Can tune from 500 khz to 1. 7 ghz and has up to 3.

2 mhz 2. 4 mhz stable of instantaneous bandwidth.

More information about DZS Elec 4328315897


Similar products:


NooElec RF Upconverter For Software Defined Radio. Works With Most SDRs Like HackRF & RTL-SDR RTL2832U with E4000, FC0013 or R820T Tuners; MF/HF Converter With SMA Jacks - NooElec Ham It Up v1.3

NooElec Inc. Ham It Up v1.3 - Internal thread : 1/4-36UNS. If you have questions please our support team any time! Package content : 1 x SMA Cable. Both items can be found in our store. We have even populated most of the components for you. Impedance :50 ohm. Full operating instructions, specifications and features list are available on our website, nooelec.

Com important note:ham it up enclosures designed for versions prior to v1. 3 will not work 100% with Ham It Up v1. 3. Power supply voltage: 6-12 VDC. We have the sma connector required to complete this bonus noise source circuit available for a small additional fee. Ham/amateur radio enthusiasts, rejoice! our MF/HF converter for software defined radio will allow you to listen to MF and HF through your existing software defined radio SDR.

NooElec RF Upconverter For Software Defined Radio. Works With Most SDRs Like HackRF & RTL-SDR RTL2832U with E4000, FC0013 or R820T Tuners; MF/HF Converter With SMA Jacks - NooElec Ham It Up v1.3 - Operating frequency01-2000mhz. Blocks the broadcast fm band between 88 - 108 MHz with over 50dB of attenuation. Insertion loss is less than 05 db between 0 - 1 GHz, and mostly less than 1. 5 db between 1 - 3 GHz. Uses sma female connectors.

More information about NooElec Inc. Ham It Up v1.3


Similar products:


Premium 3-Antenna Bundle for NESDR, RTL-SDR, HackRF, and other Software Defined Radios - NooElec RaTLSnake M5

NooElec Inc. 4330080565 - The heavy-duty antenna base contains an ultra powerful neodymium magnet, which adheres powerfully to any ferrous surface. Another mast is tuned for dvb-t/dvb-T2/GSM applications, great for customers both in North America and Europe. Connector material:Pure Copper with Great connectivity. Not Alloy. Power supply voltage: 6-12 VDC.

Male sma connector on antenna cable for easy connectivity to all SMA-input radios like our NESDR SMArt series and HackRF One. Specially designed for wideband software defined radios. Product name : sma male to sma male RF Connector;Type : Male to Male. Blocks the broadcast fm band between 88 - 108 MHz with over 50dB of attenuation.

Premium 3-Antenna Bundle for NESDR, RTL-SDR, HackRF, and other Software Defined Radios - NooElec RaTLSnake M5 - Insertion loss is less than 05 db between 0 - 1 GHz, and mostly less than 1. 5 db between 1 - 3 GHz. Uses sma female connectors. Comes with a free SMA male to SMA male adapter. Designed for sdr and radio scanner users. Color : gold tone;Weight : 26g. Listen to all hf, down to 100kHz and below, with nearly any software defined radio!

More information about NooElec Inc. 4330080565


Similar products:


NooElec NESDR SMArt - Premium RTL-SDR w/ Aluminum Enclosure, 0.5PPM TCXO, SMA Input. RTL2832U & R820T2-Based Software Defined Radio

NooElec Inc. NESDR SMArt SDR - Frequency range can be extended down to 100kHz or lower with the Ham It Up, also available on Amazon B009LQT3G6. 1:9 hf antenna balun for long wire antennas; includes excellent ESD protection on input. Great match for attaching a long wire to the Ham It Up. Fully assembled, and easy to use. Excellent specifications & low insertion loss.

Only 39. 2mm x 13. 0mm and 5g! Package content : 5 x sma Male to SMA Male RF Connector. Great for many applications including general radio scanning, air traffic control, ais, weather balloons, public safety radio, meteor scatter monitoring, adsb, POCSAG, trunked radio, P25 digital voice, DAB, NOAA APT weather satellites, APRS, ACARS, radio astronomy, or for use as a low cost panadapter with a traditional ham radio.

NooElec NESDR SMArt - Premium RTL-SDR w/ Aluminum Enclosure, 0.5PPM TCXO, SMA Input. RTL2832U & R820T2-Based Software Defined Radio - Several improvements over generic brands including use of the R820T2 tuner, aluminium case with thermal pad for passive cooling, improved component tolerances, SMA F connector, a 1 PPM temperature compensated oscillator TCXO, software activatable bias tee circuit. Can tune from 500 khz to 1. 7 ghz and has up to 3.

2 mhz 2. 4 mhz stable of instantaneous bandwidth. Heavy-duty, wide-band antenna bundle for RTL-SDR with 2m RG58 cable.

More information about NooElec Inc. NESDR SMArt SDR


Similar products: