Kuman 7 Inch Capacitive Touch Screen TFT LCD Display HDMI Module 800×480 for Raspberry Pi 3 2 Model B and RPi 1 B+ A BB Black PC Various Systems SC7B 7 Inch Raspberry Pi Touch Screen

Kuman SC7B - Interface type: 16 parallel operating temperature : -20 ~ +70 degrees centigrade storage temperature : -30 ~ +80 degrees centigrade package includes: 7inch hdmi lcd b x 1 hdmi cable x 1 USB type A plug to micro B plug cable x 1 RPi screws pack 4pcs x 1 DVD × 1 SC7B 7 inch HDMI LCDB Using standard HID protocol, support Raspbian、Ubuntu、Windows 10 IoT Single-Touch, so that you can migrate its to your own systems With the use of Pi Raspberry, Free drive.

Please peel off before use. Note: 1. Please note supported update raspberry Pi 3 2 and RPi 1 Model B B+ BB BLACK supported 2. Power supply is NOT included. For pi, do not require power supply 3. There is a sticker on the LCD screen. Warning: all data port voltage can not exceed 3. 6v. Supports bb black, comes with related images like:Lubuntu, comes with related images like:Angstrom.

Kuman 7 Inch Capacitive Touch Screen TFT LCD Display HDMI Module 800x480 for Raspberry Pi 3 2 Model B and RPi 1 B+ A BB Black PC Various Systems SC7B 7 Inch Raspberry Pi Touch Screen - When used as a computer monitor, support 10 / 8. 1 / 8 / 7, five point touch, free drive Capacitive touch control and has vertical and horizontal image flip function. Its display interface supports common RAM-less LCD driver of color depth up to 24 bit-perpixel.

More information about Kuman SC7B

Guhui Clear Case for Raspberry pi 3 Model B 7 Inch Touch Display Compatible for LANDZO 7 inch DisplayBlack

Guhui - Every piece of case with a film, please remove it before use it. This is raspberry pi 7 inch touch display case It was the perfect combination for Raspberry Pi 7 inch touch display. This case with best quality, easy to assemble. It is compatible for raspberry pi 3 pi 2 7 inch touch display.

More information about Guhui


Similar products:


Raspberry Pi 3 Model B Motherboard

RASPBERRY PI RASPBERRYPI3-MODB-1GB - Bluetooth 4. 1, bluetooth Low Energy. 1. 2ghz 64-bit quad-core armv8 CPU, 1 GB RAM. It is compatible for raspberry pi 3 pi 2 7 inch touch display. Built on the latest broadcom 2837 armv8 64 bit processor the Raspberry Pi 3 Model B is faster and more powerful than its predecessors. Please see the product packaging.

. 4 usb ports, 40 gpio pins, full hdmi port, Combined 3.5mm audio jack and composite video. Camera interface csi, micro sd card slot now push-pull rather than push-push, display interface dsI, VideoCore IV 3D graphics core. Every piece of case with a film, please remove it before use it. To take full advantage of the improved power management on the Raspberry Pi 3 and provide support for even more powerful devices on the USB ports, a 2.

Raspberry Pi 3 Model B Motherboard - 5a adapter is required. 802. 11n wireless lan, 10/100Mbps Lan Speed. Technical specifications: - broadcom bcm2837 64bit ARMv8 QUAD Core 64bit Processor powered Single Board Computer running at 1. 2ghz - 1gb ram - bcm43143 wifi on board - bluetooth low energy ble on board - 40pin extended gpio - 4 x usb2 ports - 4 pole stereo output and composite video port - Full size HDMI - CSI camera port for connecting the Raspberry Pi camera - DSI display port for connecting the Raspberry Pi touch screen display - MicroSD port for loading your operating system and storing data - Upgraded switched Micro USB power source now supports up to 2.

More information about RASPBERRY PI RASPBERRYPI3-MODB-1GB


Similar products:


ELECROW HDMI TFT LCD Display Monitor 7 Inch 1024X600 HD Screen with Touch Function for Raspberry Pi B+/2B Raspberry Pi 3B

Elecrow 6453681 - It is compatible for raspberry pi 3 pi 2 7 inch touch display. Features a good solution for those seeking for a bigger resolution display good touch response supports banana pi / banana pro, and ubuntu image not only for mini-PCs, comes with Lubuntu, it can work as a computer monitor just like any other general HDMI screen touch function is unavailable in this case Back light control to lower power consumption HDMI interface for displaying, USB interface for touch control External power supply shoudl only with VCC and GND, comes with Raspbian driver works with your Raspbian directly, Raspbian images Supports BB Black, comes with Angstrom image Supports Raspberry Pi, no signal connection.

Specifications lcd type:tft 7 inch tft capacitive touch screen display, 1024x600 Resolution HDMI input Usb touch and power, [email protected] 5a lcd size :164. 9mm*124. 27mm weight:380g it was the perfect combination for Raspberry Pi 7 inch touch display. 802. 11n wireless lan, 10/100Mbps Lan Speed. Bluetooth 4. 1, bluetooth Low Energy.

ELECROW HDMI TFT LCD Display Monitor 7 Inch 1024X600 HD Screen with Touch Function for Raspberry Pi B+/2B Raspberry Pi 3B - 1. 2ghz 64-bit quad-core armv8 CPU, 1 GB RAM.

More information about Elecrow 6453681


Similar products:


Raspberry Pi 10 Inch Touch Screen - SunFounder 10.1" HDMI 1280x800 IPS LCD Touchscreen for RPi 3 Model B+ 3B 2B LattePanda Beagle Bone

SunFounder - Universal fastening position - supports Raspberry Pi 3, LattePanda, 2 Model B, and RPi 1 B+, and PC. Multiple applicable os - supports Raspbian, Ubuntu, Ubuntu Mate, Windows, Android, Chrome OS. Thoughtful designed - keeps itself flat with 4 copper standoffs of the same height at the back case, also for fastening.

Every piece of case with a film, please remove it before use it. Package included 1 x 101'' ips touch screen 7 x M2. 5 x 14. 4 copper standoff 2 x M2. 5 x 22 copper standoff 1 x hdmi cable 1 x micro usb cable 1 x USB Touch Screen Cable It was the perfect combination for Raspberry Pi 7 inch touch display. Introduction this sunfounder Touch Screen is a 10-point IPS touch screen in a 10

Raspberry Pi 10 Inch Touch Screen - SunFounder 10.1" HDMI 1280x800 IPS LCD Touchscreen for RPi 3 Model B+ 3B 2B LattePanda Beagle Bone - 1'' big size and with a high resolution of 1280x800, bringing you perfect visual experience. 1. 2ghz 64-bit quad-core armv8 CPU, 1 GB RAM. This case with best quality, easy to assemble. 4 usb ports, 40 gpio pins, full hdmi port, Combined 3.5mm audio jack and composite video.

More information about SunFounder


Similar products:


Waveshare Bicolor Case/Cover for 7inch Capacitive Touch Screen HDMI Interface LCD Combines Raspberry Pi 7inch LCD and Pi to an All-in-one Device

Waveshare Bicolor Case for 7inch LCD - It will combines the LCD and supported mini-PC into an All-in-one device. 4 usb ports, 40 gpio pins, full hdmi port, Combined 3.5mm audio jack and composite video. Camera interface csi, display interface dsI, Micro SD card slot now push-pull rather than push-push, VideoCore IV 3D graphics core. A good hdmi tft lcd display with a high resolution picture and large viewing screen.

Resolution:1024x600, 7 inches lcd backlight Color TFT LCD monitor with touch function. Large viewing angle, fast response time, full color display with high quality. Works perfectly for raspberry Pi 3 2 Model B B+ win 7/8/10 systems. Package includes: 7 inch touch lcd display x1, USB cable x1, HDMI connector x1, CDx1.

Waveshare Bicolor Case/Cover for 7inch Capacitive Touch Screen HDMI Interface LCD Combines Raspberry Pi 7inch LCD and Pi to an All-in-one Device - High resolution - the 101 inch ips touchscreen lCD monitor with high resolution of 1280×800 pixels. Plug and play - just connect the control board and the screen by an HDMI cable and it can work immediately, needless of driver. Bluetooth 4. 1, bluetooth Low Energy. Overview this product includes bicolor case and bottom holder designed for 7inch capacitive touch screen LCD.

How to install:http://www.

More information about Waveshare Bicolor Case for 7inch LCD


Similar products:


for Raspberry PI 3 Generation TFT Touch Screen, Kuman 3.5 inch TFT LCD Display Monitor Support All Raspberry PI System, Video Movie Play, Arcade Game, HDMI Audio Input SC6A 3.5 inch HDMI RPI Screen

kuman SC6A-US - Description: the same mirror supports raspberry pie, the 2 generation, B type PI3/PI2/b/B+/A/A+, avoid buying bulky HDMI monitors. This case with best quality, easy to assemble. Package contains: 1x 3. 5inch lcd for raspberry pi 1x touch pen 1x hdmi to hdMI Converter 1x CD instruction It was the perfect combination for Raspberry Pi 7 inch touch display.

The screen can be touched when it is connected with the raspberry pi board. Detailed tutorials in cd including project introduction and source code CAN BE PROVIDED FOR FREE, please contact us with your order ID BY Email via Amazon to get more Technical support. Every piece of case with a film, please remove it before use it.

for Raspberry PI 3 Generation TFT Touch Screen, Kuman 3.5 inch TFT LCD Display Monitor Support All Raspberry PI System, Video Movie Play, Arcade Game, HDMI Audio Input SC6A 3.5 inch HDMI RPI Screen - Refreshes up to 60 frames per second. Plug and play: the display can be plugged and displayed at any time when the main board is running. Providing a convenient man-machine interface for raspberry pie, you can DIY anytime, anywhere with the use of power bank. It is compatible for raspberry pi 3 pi 2 7 inch touch display.

Use the new raspberry pie UI, the new kernel 4. 9. 17! humanized transposon! Features: This 3.

More information about kuman SC6A-US


Similar products:


kuman Raspberry PI Camera Module 5MP 1080p OV5647 Sensor HD Video Webcam Supports Night Vision SC15 Raspberry PI Camera Module

kuman SC15-CA - The screen can be touched when it is connected with the raspberry pi board. Detailed tutorials in cd including project introduction and source code CAN BE PROVIDED FOR FREE, please contact us with your order ID BY Email via Amazon to get more Technical support. Rpi camera, supports raspberry Pi model B/B+ A+ RPi 3 2 1.

. 5 megapixel ov5647 sensor, Supports up to 2 infrared LED and/or fill flash. Universal fastening position - supports Raspberry Pi 3, LattePanda, 2 Model B, and RPi 1 B+, and PC. Multiple applicable os - supports Raspbian, Ubuntu, Windows, Android, Ubuntu Mate, Chrome OS. Thoughtful designed - keeps itself flat with 4 copper standoffs of the same height at the back case, also for fastening.

kuman Raspberry PI Camera Module 5MP 1080p OV5647 Sensor HD Video Webcam Supports Night Vision SC15 Raspberry PI Camera Module - It includes bicolor case and bottom holder designed for 7inch capacitive touch screen LCD. Orange pi, but also kali, retropie, Banana PI M2+ also supported date cable not include. Support all raspberry pi system: not only raspbian, piplayer, nanop pi m1, ubuntu, Windows10 are supported. How to install:http://www.

Waveshare. Com/wiki/file:7inch-HDMI-LCD-Bicolor-case-assemble. Jpg.

More information about kuman SC15-CA


Similar products:


ELEMENT Element14 Raspberry Pi 3 B+ Motherboard

Element14 Raspberry Pi 3 Model B+ - Package contains:2pcs infrared LED Light, 1 piece Infrared Night Vision Webcam Camera Board. It has improved power management to support more powerful external USB devices and now comes with built-in wireless and Bluetooth connectivity. No need to burning software. Resolution: the original resolution is 480*320 resolution, the screen can just display in 480*320 to 1920*1080 resolution 3:2 ratio is better.

This case with best quality, easy to assemble. Every piece of case with a film, please remove it before use it. Support all raspberry pi system: not only raspbian, ubuntu, nanop pi m1, piplayer, Windows10 are supported.802. 11n wireless lan, 10/100Mbps Lan Speed. Package contents : - 1x raspberry pi 3 Model B+ It was the perfect combination for Raspberry Pi 7 inch touch display.

ELEMENT Element14 Raspberry Pi 3 B+ Motherboard - Bluetooth 4. 2, bluetooth Low Energy. Orange pi, but also kali, retropie, Banana PI M2+ also supported date cable not include.1. 4ghz 64-bit quad-core armv8 CPU, 1 GB RAM. It is compatible for raspberry pi 3 pi 2 7 inch touch display.

More information about Element14 Raspberry Pi 3 Model B+


Similar products:


MakerFocus Raspberry Pi Battery Pack,Raspberry Pi Battery, USB Battery Pack Raspberry Pi, Expansion Board Power Supply with Switch for Cellphone and Raspberry Pi 3 Model B B+ and Pi 2B B+

MakerFocus 4328613101 - The maximum external power supply capacity is: 5. 1v 2. 5a. As an indoor ups power supply mode: microusb plugs into a normal 5V 2A power adapter, and the external output USB-A interface can output a maximum of 5. 1v 3a. 4+2led for charging and discharging, and when it is off, it is off. 802. 11n wireless lan, 10/100Mbps Lan Speed.

It will be better than the old!! when the switch is turned to the ON position, the UPS motherboard supplies power is output, and any USB port can be selected from the dual USB to supply power to the Raspberry Pi series motherboard. How to install:http://www. Waveshare. Com/wiki/file:7inch-HDMI-LCD-Bicolor-case-assemble.

MakerFocus Raspberry Pi Battery Pack,Raspberry Pi Battery, USB Battery Pack Raspberry Pi, Expansion Board Power Supply with Switch for Cellphone and Raspberry Pi 3 Model B B+ and Pi 2B B+ - Jpg. 4 usb ports, 40 gpio pins, full hdmi port, Combined 3.5mm audio jack and composite video. Camera interface csi, display interface dsI, Micro SD card slot now push-pull rather than push-push, VideoCore IV 3D graphics core. When charging while charging: the external power-off of the UPS will not affect the external power supply of the output.

As an outdoor portable power supply, the main board is powered by a lithium battery. Raspberry pi night Vision Camera, supports all revisions of the Pi.

More information about MakerFocus 4328613101


Similar products:


CanaKit Raspberry Pi 3 B+ B Plus with 2.5A Power Supply UL Listed

CanaKit - Canakit 2. 5a usb power supply with micro usb cable and Noise Filter - Specially designed for the Raspberry Pi 3 B+ UL Listed. 3 charge charging indicator led: when the ups is externally charged via the MicroUSB interface, the light is always on, and battery power display: 1Power LED: When the switch is turned ON, the Charge LED starts to work.

The motherboard integrates overcurrent and overdischarge protection: The external output port has a self-recovery fuse to prevent the raspberry pie from being burnt due to an external short circuit. Two output modes: except for the regular usb stand external output. Raspberry pi night Vision Camera, supports all revisions of the Pi.

CanaKit Raspberry Pi 3 B+ B Plus with 2.5A Power Supply UL Listed - 5 megapixel ov5647 sensor, Supports up to 2 infrared LED and/or fill flash. Support all raspberry pi system: not only raspbian, piplayer, ubuntu, nanop pi m1, Windows10 are supported. This case with best quality, easy to assemble. 4 usb ports, 40 gpio pins, full hdmi port, Combined 3.5mm audio jack and composite video.

Camera interface csi, display interface dsI, Micro SD card slot now push-pull rather than push-push, VideoCore IV 3D graphics core. When charging while charging: the external power-off of the UPS will not affect the external power supply of the output. As an outdoor portable power supply, the main board is powered by a lithium battery.

More information about CanaKit


Similar products: